I have up for grabs are the following item. If you have any questions please pm me or email me at jr_ss@comcast.net

-Tomei SLA's for SR, BNIB - $230 shipped

I also have a running S14 SR short block forsale. It has been run and ran great. It will come assembled with the head, all brackets, and CAS but, no accessories, in/ex manifolds and a stock oil pan... The oilfilter block has been removed, but I may have it to include(I had a Tomei oil block adapter installed). I also have a -10an bung welded to the upper oil pan for my catch can drain and it was modified to run a full windage tray and crank scraper in the gridle along w/ ARP main studs, which will be included. The motor has good compression across the board(140) and put down 360rwhp at 14psi on a 3071R. I'm upgrading to a VVL setup and would like to move this to fund the build. I have access to ship this and will if buyer pays for it. I've shipped one before and it ran $100-150 to ship as far as Texas.

Here's a link to the build pictures...
Engine Build pictures by jr_ss - Photobucket

S14 SR motor set - $1150 plus shipping

-Head-
Supertech DVS
New valve seals
Mild port on intake side

-Bottomend-
JE forged 8.5:1 x 86.5mm pistons
Eagle Rods w/ ARP2000's
Cosworth main/rod/thrust washer bearings
Cosworth 1.5mm HG
ARP main/head studs
New oil pump/timing chain items
New waterpump
All coolant hoses
SARD lower temp Thermostat




__________________

 

what you switching to?

bump for you

 

Greddy Oil pan and RAS are sold...

Waldo, I'm staying SR but going a more potent route, Neo comes to mind...

 

Are you going complete VE or just head swap? Im going the same route but im utilizing DET short block and VE oil pump.

 

I'm doing the conversion. The DET has oil squirters, where as the VE doesn't, if I'm not mistaken. Not to mention the DET has a forged crank. It'll be awhile before it's all said and done, but should be interesting.

 

jr whats your phone number? a friend of mines is looking for one...

 

sweet stuff, good luck

ttt

 

Correct. Just wondering, I'll be going the same route. Im buying a complete Xtrail set from Miko in Dec. Just seems to be better in every way and same cost as a SR16/VE after all is said and done, then again im utilizing stock ECU and iirc you have a Haltech.

 

Thanks for the bump... I'd like to get this thing moved. Omar, talk to your buddy...

[ATTACH=CONFIG]153347[/ATTACH]

 

sorry man I did ,and he was so piss that he bought a sr20, 5 days before i text him your number (engine was shipped already)