WTB working S14 Driver side window switch and 2 good summer 17" tires
EDIT:
Zenki front bumper mounting bracket ( I have the crash bar already)
Also poly front control arm bushings
LMK if you have
225-235/40-45/17
Zenki front bumper mounting bracket ( I have the crash bar already)
Also poly front control arm bushings
LMK if you have
225-235/40-45/17
Last edited by supreams14; Sep 15, 2010 at 04:24 PM.
super glue and tweezers is all you will need to fix your switch.
definitely disassemble the switch in a place where you will not loose the 20x1mm spring inside of the square white tube that broke the 2x2mm piece of black plastic off of the inside of the switch. The 2x2mm broken plastic piece that you have to glue back on should be in with the circuit board somewhere.
while you're in their remove the blue rubber cover from the LED, it still works but LEDs dim over time on an inverse logarithmic curve to less than 50% of their initial luminance and hold there until something breaks. Hence, the bullshit that "LEDs never burn out". the cover blocks that 50%, it'll be orange afterwards.
definitely disassemble the switch in a place where you will not loose the 20x1mm spring inside of the square white tube that broke the 2x2mm piece of black plastic off of the inside of the switch. The 2x2mm broken plastic piece that you have to glue back on should be in with the circuit board somewhere.
while you're in their remove the blue rubber cover from the LED, it still works but LEDs dim over time on an inverse logarithmic curve to less than 50% of their initial luminance and hold there until something breaks. Hence, the bullshit that "LEDs never burn out". the cover blocks that 50%, it'll be orange afterwards.
Thanks. I'll give it a shot but I already tried playing with it once.
How long you been going there?





