Huge FS thread- HKS ,RB, Apexi,Trust,(56k no waayy)
Powered by Canon
Thread Starter
Join Date: Nov 2006
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Huge FS thread- HKS ,RB, Apexi,Trust,(56k no waayy)
Well, Parting out the S14 due to many different things. Mainly the lack of interest in them.
Here it is- All prices are OBO.
Mostly complete RB20DET swap for S14
Pros/ Parts you get with swap
Rb20det
Brand new Mckinney motor mounts
Brand new starter
Brand new OEM exhaust manifold studs and nuts
Brand new Cometic front & rear main seals
Brand new Cometic valve cover gaskets
Brand new Cometic Intake and 3 Ply metal exhaust mani gasket
Freshly ceramic coated exhaust mani, turbo elbow and turno hot side
Freshly turned flywheel
Koyo Radiator
3 fans to work with
Trust air filter
Walbro 255 fuel pump wired
1 set of rb20 and 1 set of rb25 VC's
Freshly powder coated VC's and Intake manifold
Custom built Intake manifold (velocity stacks on each cylinder)
Freshly painted pulleys
Working AC compressor
Working PS pump
ECU
Block and head super clean
Oil pan resealed with Super grey
Freshly cleaned MAF
Converted wiring harness for S14
Clean tranny
All the old piping and factory stuff
Radiator hoses
Trust down pipe
Apexi intercooler (first come first serve)(GTR)
Anything I forgot to mention is in the pics
Cons/ things you need
Put the intake stuff on
I recommend getting a new clutch disk and having the pressure plate machined ($150 for machining and 6 puck disk at TBCS)
Koyo has small leak somewhere
install front and rear main seals
and install the engine
I'm Looking to get around $2500 range for the complete setup. Motor ran before pulled and I have people to vouch for that.
Now for the rest of my crap
HKS turbo cover $100
Brand new Trust boost gauge $100
Used Trust temp $50 No harnesses only gauge
RB exhaust mani $100
Apexi GT spec Intercooler for GTR $500 (retail is 1500)
Good S14 Pass airbag $40
SR20 Oil cooler $150
Greddy TT No harness $30
HKS FCD $20
JDM S14 black face cluster $100 Converted to read MPH on the KPH cluster (so when the cluster says 180 KPH your actually going 180 MPH)
Random Bumper lights $10
S14 Pass window switch $10
Random Exhuast wrap $10
Greddy Profec B Boost controller $150 With harness and solenoid
RB20DET valve cover and coilpack cover
The more you buy the better the deal! I need this crap out!
Everything in pics is for sale!
Thanks,
Rob
Here it is- All prices are OBO.
Mostly complete RB20DET swap for S14
Pros/ Parts you get with swap
Rb20det
Brand new Mckinney motor mounts
Brand new starter
Brand new OEM exhaust manifold studs and nuts
Brand new Cometic front & rear main seals
Brand new Cometic valve cover gaskets
Brand new Cometic Intake and 3 Ply metal exhaust mani gasket
Freshly ceramic coated exhaust mani, turbo elbow and turno hot side
Freshly turned flywheel
Koyo Radiator
3 fans to work with
Trust air filter
Walbro 255 fuel pump wired
1 set of rb20 and 1 set of rb25 VC's
Freshly powder coated VC's and Intake manifold
Custom built Intake manifold (velocity stacks on each cylinder)
Freshly painted pulleys
Working AC compressor
Working PS pump
ECU
Block and head super clean
Oil pan resealed with Super grey
Freshly cleaned MAF
Converted wiring harness for S14
Clean tranny
All the old piping and factory stuff
Radiator hoses
Trust down pipe
Apexi intercooler (first come first serve)(GTR)
Anything I forgot to mention is in the pics
Cons/ things you need
Put the intake stuff on
I recommend getting a new clutch disk and having the pressure plate machined ($150 for machining and 6 puck disk at TBCS)
Koyo has small leak somewhere
install front and rear main seals
and install the engine
I'm Looking to get around $2500 range for the complete setup. Motor ran before pulled and I have people to vouch for that.
Now for the rest of my crap
HKS turbo cover $100
Brand new Trust boost gauge $100
Used Trust temp $50 No harnesses only gauge
RB exhaust mani $100
Apexi GT spec Intercooler for GTR $500 (retail is 1500)
Good S14 Pass airbag $40
SR20 Oil cooler $150
Greddy TT No harness $30
HKS FCD $20
JDM S14 black face cluster $100 Converted to read MPH on the KPH cluster (so when the cluster says 180 KPH your actually going 180 MPH)
Random Bumper lights $10
S14 Pass window switch $10
Random Exhuast wrap $10
Greddy Profec B Boost controller $150 With harness and solenoid
RB20DET valve cover and coilpack cover
The more you buy the better the deal! I need this crap out!
Everything in pics is for sale!
Thanks,
Rob
__________________
-Rob Plympton
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
Last edited by TpaS13; 05-16-2010 at 02:50 PM.
Electronicals master ;P
Join Date: Mar 2005
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
kinda want that gauge cluster but cant afford.
does the oil cooler set-up come with the lines and the sandwhich plate?
ttt for a good seller
does the oil cooler set-up come with the lines and the sandwhich plate?
ttt for a good seller
__________________
Sponsored By Carrabba's
Sponsored By Carrabba'sR.I.P. Tim Aldrich
Powered by Canon
Thread Starter
Join Date: Nov 2006
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does! PM'ed you about cluster
__________________
-Rob Plympton
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
Powered by Canon
Thread Starter
Join Date: Nov 2006
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
__________________
-Rob Plympton
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
Canon EOS 40D---EF 28-135mm f/3.5-5.6 IS---EF 50mm f/1.8 II---Sigma 18-55mm F/3.5-5.6---Strobist gear
flickr
So there I was bak in NAM
Join Date: Apr 2004
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Interested in intake mani if ure willing to part. The flange for rb tb or q45??
__________________
Billy C.
A Father Never Forgets.. In loving memory of Chasen Alexander Centeno. March 5th, 2004.
Billy C.
A Father Never Forgets.. In loving memory of Chasen Alexander Centeno. March 5th, 2004.
Registered User
Join Date: May 2002
Posts: 2,473
Likes: 0
Received 0 Likes
on
0 Posts
