SC 97 kouki partout. Built S13 sr20, Gt35r,Peakboost,Tial,Cosworth,Greddy,Tomei, FPR
Really want to trade for a Good daily, Dont care what kind of car (no 240s') the newer the better. If not ill just buy a car with the money made from the parts.
located in charleston SC
there is still a lein on the title so I dont have the title to sell the car.
97 pearl white
Body in good condition except for ding front of hood just above driver headlight
Its a 5sp
car was in a single accident, i hit a curb.(but i hit it pretty good)
The motor is in great shape, I only have been able to put about 100 miles on the setup, however the motor was pulled out of a buddies s13 with about 4k on the bottom and about 2k on head. there was a small oil leak but it was becasue i needed a oil catch can.
weisco 8.5cr pistons/ shotpeened rods
bc springs and retainers
bc 264 cams
3 angle valve job
port and polish
apexi 1.1 mm hg
peakboost t3 topmount mani(ceramic coated with 2300 degree coating) and also sandblasted inside for smoother airflow.
peakboost downpipe w/ flex
tial 38mm WG with 1 bar spring.
tomei injectors 740cc's
garret gt35r with a .63 AR backhousing for quicker spool but awesome topend. also has the anti-surge compressor housing(less than 150 miles on this turbo.
ISIS Black steelbraided GT series Turbo lines
C&R radiator with a single 14 or 16 inch FAL electric fan.
Emance 62 ecu tuned for z32 maf and 740cc inj.
Act 6 puck sprung clutch new TO bearing rated to 400+
xxr 502's 18 x 8.5 F
18 x 9.5 R good meat on tires
Also have a spare set of bc 264's for sale
as well as a spare s13 sr block(need machining, rust in cylinders)
Stuff still in Packaging Never used
Aeromotive FPR
Hallman Manual Boost controller
Greddy Head studs (way better than arp and cost $430 new. Mazworx uses these on their record setting s14)
cosworth 1.1mm Headgasket
isis rocker arm stoppers
HKS adjustable cam gears
Im sure im forgetting some stuff but ill add it sooner or later.
Here are a few pics of various things, These are not the only pics I will be putting in the thread I just had these already on my phone so I figured it would at least give you an idea until better pics are up. If you want to see something in particular let me know




I have the front bumper in this pic. So technically I do have a front bumper!

Here you can see the reupholstered seats and door panels. The carpet is new as well in the pic. like i said, these were just on my phone so nevermind the grass on the floor. Roofliner was also redone with black cloth which looks great. (i have a clean dash and steering wheel so no worries there)

Motor pics




Peakboost Ceramic Coated and sandblasted Mani




Gt35r w/ anti-surge and .63 A/R backhousing for more topend than a 3076r but not the lag of the .82 A/R GT35r's


Looking for cash or trade for a daily. any car is ok but nothing F&F style. dont really want another 240. maybe a 4 door or something. Just offer
Id be willing to trade the whole motorset for a good daily. BTW even running pig rich the car pulled preetty dayumm hard.
Call or shared_pm 843 367 6749 Feel free to call anytime I usually stay up till 3-4 am
located in charleston SC
there is still a lein on the title so I dont have the title to sell the car.
97 pearl white
Body in good condition except for ding front of hood just above driver headlight
Its a 5sp
car was in a single accident, i hit a curb.(but i hit it pretty good)
The motor is in great shape, I only have been able to put about 100 miles on the setup, however the motor was pulled out of a buddies s13 with about 4k on the bottom and about 2k on head. there was a small oil leak but it was becasue i needed a oil catch can.
weisco 8.5cr pistons/ shotpeened rods
bc springs and retainers
bc 264 cams
3 angle valve job
port and polish
apexi 1.1 mm hg
peakboost t3 topmount mani(ceramic coated with 2300 degree coating) and also sandblasted inside for smoother airflow.
peakboost downpipe w/ flex
tial 38mm WG with 1 bar spring.
tomei injectors 740cc's
garret gt35r with a .63 AR backhousing for quicker spool but awesome topend. also has the anti-surge compressor housing(less than 150 miles on this turbo.
ISIS Black steelbraided GT series Turbo lines
C&R radiator with a single 14 or 16 inch FAL electric fan.
Emance 62 ecu tuned for z32 maf and 740cc inj.
Act 6 puck sprung clutch new TO bearing rated to 400+
xxr 502's 18 x 8.5 F
18 x 9.5 R good meat on tires
Also have a spare set of bc 264's for sale
as well as a spare s13 sr block(need machining, rust in cylinders)
Stuff still in Packaging Never used
Aeromotive FPR
Hallman Manual Boost controller
Greddy Head studs (way better than arp and cost $430 new. Mazworx uses these on their record setting s14)
cosworth 1.1mm Headgasket
isis rocker arm stoppers
HKS adjustable cam gears
Im sure im forgetting some stuff but ill add it sooner or later.
Here are a few pics of various things, These are not the only pics I will be putting in the thread I just had these already on my phone so I figured it would at least give you an idea until better pics are up. If you want to see something in particular let me know




I have the front bumper in this pic. So technically I do have a front bumper!

Here you can see the reupholstered seats and door panels. The carpet is new as well in the pic. like i said, these were just on my phone so nevermind the grass on the floor. Roofliner was also redone with black cloth which looks great. (i have a clean dash and steering wheel so no worries there)

Motor pics




Peakboost Ceramic Coated and sandblasted Mani




Gt35r w/ anti-surge and .63 A/R backhousing for more topend than a 3076r but not the lag of the .82 A/R GT35r's


Looking for cash or trade for a daily. any car is ok but nothing F&F style. dont really want another 240. maybe a 4 door or something. Just offer
Id be willing to trade the whole motorset for a good daily. BTW even running pig rich the car pulled preetty dayumm hard.
Call or shared_pm 843 367 6749 Feel free to call anytime I usually stay up till 3-4 am
Last edited by Darkist 240sx; Jan 6, 2010 at 09:19 AM.
I am assuming you can get the title if the lein balance is paid off.
I want the a/c trim and the little din under the radio. How much shipped to 33626?
Selling the trunk?
I want the a/c trim and the little din under the radio. How much shipped to 33626?
Selling the trunk?
__________________

Last edited by Super Coupe; Jan 6, 2010 at 08:00 AM.
HAHA the scratches on the bumper came from the shrubbery/bush that was on the curb. None the less it sucked....BAD
SRH666: I dont know exactly what you mean, I would imagine you would paypal me, and i would ship the Radiator and efan to you!
Ill let em both go for $300shipped
SRH666: I dont know exactly what you mean, I would imagine you would paypal me, and i would ship the Radiator and efan to you!
Ill let em both go for $300shipped




