poly mounts rims trans mount TB W/ TPS Starter mafs gtech dual oilfilterrelocate more
Thread Starter
Registered User
Joined: Jul 2008
Posts: 1,829
Likes: 0
poly mounts rims trans mount TB W/ TPS Starter mafs gtech dual oilfilterrelocate more
***PRICE DROP***
Throw any offers
Manuel boost controler 15
poly mounts 50--->40
dual oil filter relocation kit for s13-sr20det 40--->35
96 ka starter 40--->30
t25/28 compressor outlet colcking adapter 20--->15
5000 mile 96 ka water pump 20--->10
Vision aftermarket FPR 20--->10
96 ka throttle body and tps 20--->15
1 sr injector 15--->10
chiltons 92+ 240/altima book 10--->8
3x S14 rear sway bar with all hard where and bushings(upgrade that base model) 40
S13 wastegate
96 ka24de
block only
crankshaft (spun rod bearing)
oil pump
96 windsheld washer tank
1-225/40/18 toyo proxi
Falcon fk 452's 2x 225/45/18 60% but has inner camber ware.
Yokohama avs es100 2x 235/40/18 1 60% 1 40% with inner camber ware.
These tires would make good drift tires.
4x 225/55/r17 republic enterprize steel
Make an offer
I got em for $90 about 1.5 years ago off ebay. They lower the engine about 1 inch to lower the center of gravity. I used them for about 1.5 years. They work good. Cant remember the co. name and cant find it. When I pulled my motor and reinstalled it, I over tightened them so the bolts need adjusted. Not a big deal. I only took them out because my greddy oil pan was about 1/4" lower than the crossmember and I didn't like that because I wanted to slam my car. I did bottom out on a driveway but it didn't touch my greddy pan tho. If you dont want the motor lower, you could match up the big washers and that would work good.
Wheel dont spin unless you put a wrench on it.
Starter has 110,000 miles on it.
post shared_pm email text or call 727 623 3274 Bildro@aol.com Bill
Throw any offers
Manuel boost controler 15
poly mounts 50--->40
dual oil filter relocation kit for s13-sr20det 40--->35
96 ka starter 40--->30
t25/28 compressor outlet colcking adapter 20--->15
5000 mile 96 ka water pump 20--->10
Vision aftermarket FPR 20--->10
96 ka throttle body and tps 20--->15
1 sr injector 15--->10
chiltons 92+ 240/altima book 10--->8
3x S14 rear sway bar with all hard where and bushings(upgrade that base model) 40
S13 wastegate
96 ka24de
block only
crankshaft (spun rod bearing)
oil pump
96 windsheld washer tank
1-225/40/18 toyo proxi
Falcon fk 452's 2x 225/45/18 60% but has inner camber ware.
Yokohama avs es100 2x 235/40/18 1 60% 1 40% with inner camber ware.
These tires would make good drift tires.
4x 225/55/r17 republic enterprize steel
Make an offer
I got em for $90 about 1.5 years ago off ebay. They lower the engine about 1 inch to lower the center of gravity. I used them for about 1.5 years. They work good. Cant remember the co. name and cant find it. When I pulled my motor and reinstalled it, I over tightened them so the bolts need adjusted. Not a big deal. I only took them out because my greddy oil pan was about 1/4" lower than the crossmember and I didn't like that because I wanted to slam my car. I did bottom out on a driveway but it didn't touch my greddy pan tho. If you dont want the motor lower, you could match up the big washers and that would work good.
Wheel dont spin unless you put a wrench on it.
Starter has 110,000 miles on it.
post shared_pm email text or call 727 623 3274 Bildro@aol.com Bill
Last edited by supreams14; May 5, 2010 at 02:16 PM.
February - Ride of the Month
Joined: Apr 2005
Posts: 7,141
Likes: 0
Throw any offers
poly mounts 50
dual oil filter relocation kit 40
17x7 +42 polished lip 225/50/17 2 yokahama 2 goodyear good tires 180
96 ka starter 30
2 n60 mafs 1 e60 20 for all
t25/28 compressor outlet colcking adapter 20
5000 mile 96 ka water pump 20
s13 sr speed sensor/ FPR 10
96 240 fuel pump 10
96 ka throttle body and tps 20
1 sr injector 15
s14 piller with 2 gauge pod 20
uniersal 3 gauge pod 10
chiltons 92+ 240/altima book 10
cut 96 ka intake aluminum pipe 15
Gtech ss shows hp/torque/1\4 mile time/0-60/G's used my apexi stand 75
trans mount 15
Locked t25 25
post shared_pm email text or call 727 623 3274 Bildro@aol.com Bill
poly mounts 50
dual oil filter relocation kit 40
17x7 +42 polished lip 225/50/17 2 yokahama 2 goodyear good tires 180
96 ka starter 30
2 n60 mafs 1 e60 20 for all
t25/28 compressor outlet colcking adapter 20
5000 mile 96 ka water pump 20
s13 sr speed sensor/ FPR 10
96 240 fuel pump 10
96 ka throttle body and tps 20
1 sr injector 15
s14 piller with 2 gauge pod 20
uniersal 3 gauge pod 10
chiltons 92+ 240/altima book 10
cut 96 ka intake aluminum pipe 15
Gtech ss shows hp/torque/1\4 mile time/0-60/G's used my apexi stand 75
trans mount 15
Locked t25 25
post shared_pm email text or call 727 623 3274 Bildro@aol.com Bill
Thread Starter
Registered User
Joined: Jul 2008
Posts: 1,829
Likes: 0
Header 25
might traid
picture and 250 for your tuned ecu
might traid
picture and 250 for your tuned ecu
Last edited by supreams14; Dec 13, 2009 at 04:00 PM.
Thread Starter
Registered User
Joined: Jul 2008
Posts: 1,829
Likes: 0
No stand. I used a apexi safc2 stand. I put my safc2 where the ash tray goes and I would have to dig for it if you needed it. I dont know what to ask for traid. link me your FS add. I really want cash so I can buy seans ecu tho!
Last edited by supreams14; Dec 13, 2009 at 05:48 PM.
(OO\____/OO)
Joined: Oct 2008
Posts: 5,612
Likes: 0
Thread Starter
Registered User
Joined: Jul 2008
Posts: 1,829
Likes: 0
Sr20det. It up the capasity, filtration and makes oil changes quick and easy.
Dont see anything BZ>.
Dont see anything BZ>.
Last edited by supreams14; Dec 13, 2009 at 07:11 PM.
