PARTING OUT MY HATCH!! 5 speed swap for sale, black interior, Aero, & SILVIA SEATS.
Will be parting it out this weekend when I go pay for a storage unit.
READ -
The only thing the shell doesn't have is fenders.
The driver is usable but has dent. The pass fender is trash.
-Uras type 4 knock off fiberglass aero.
all 4 pieces included, not perfect but work.
-$240 plus single cam bumper ( I have a rear bumper)




-Silvia seats, KNOCK OFFS EBAYS W>E. selling for a friend. Black with red stitching and silvia emblem on top. Come with universal slider but no rails. VERY VERY VERY VERY COMFY! 200 firm or trade for s14 se seats or kouki seats plus $75-100
minor minor little rip on driver seat , you can see it in the pic.


-Greddy counter-weighted shift knob. Want to trade for wild crazy knob like bubble knob.or 25 bucs.
-Short shifter with plate- 20 (e-bay brand)
-Black interior, complete with dash. Dash needs work but the other panels are good. I think I have every panel.
(I think the only thing missing is the front seats, and the rear hatch area stuff has seen better days.)
*A pillars ( driver has 2 holes drilled in it) (pass good)
*Rear upper and lower panels are good,
*Good headliner, one of the better ones around.
*Carpet is black, has one small hole in floor board but it is in overall good shape and smells good.
*Radio bezel has seen better days ( sanded for paint lol)
*Center console
*Ash-tray
*Rear seats
*2 long black pieces that cover the door jams
*E brake cover.
*Under dash trim
*kick panels.( 2 sets to choose from)
*grey tweed glovebox

I don't know why I just listed all of that, I am sure you get the picture.
$125 firm takes it all. Don't want to seperate !!!!!
-5 speed swap!
Clutch pedal,
brake pedal,
master cylinder,
slave cylinder,
clutch line (hardline),
NON abs driveshaft,
S13 trans with no grinds,
s13 oem flywheel
(NO CLUTCH INCLUDED!)
$240 firm!!!
-Exterior panels-
- driver fender ( has minor dent) , painted b16 blue. -20
- Glass is all in good cond. pay before you pull ( make offers)
-(pop ups Hood )has baby bend near the windshield corner but not bad and not noticeable. -40
- Hatch with wing and glass(grey)-50
- Tail lights, pretty good shape- 20
- black center piece under the tail lights- 15
- Rear bumper frame ( metal bumper)- 20
- manual mirrors (pass missing glass)- 20
- Headlights and motors- 25
- Engine bay components- make offer ( no power steering or a.c. lines)
Anything not listed in make offer!!

READ -
The only thing the shell doesn't have is fenders.
The driver is usable but has dent. The pass fender is trash.
-Uras type 4 knock off fiberglass aero.
all 4 pieces included, not perfect but work.
-$240 plus single cam bumper ( I have a rear bumper)




-Silvia seats, KNOCK OFFS EBAYS W>E. selling for a friend. Black with red stitching and silvia emblem on top. Come with universal slider but no rails. VERY VERY VERY VERY COMFY! 200 firm or trade for s14 se seats or kouki seats plus $75-100
minor minor little rip on driver seat , you can see it in the pic.


-Greddy counter-weighted shift knob. Want to trade for wild crazy knob like bubble knob.or 25 bucs.
-Short shifter with plate- 20 (e-bay brand)
-Black interior, complete with dash. Dash needs work but the other panels are good. I think I have every panel.
(I think the only thing missing is the front seats, and the rear hatch area stuff has seen better days.)
*A pillars ( driver has 2 holes drilled in it) (pass good)
*Rear upper and lower panels are good,
*Good headliner, one of the better ones around.
*Carpet is black, has one small hole in floor board but it is in overall good shape and smells good.
*Radio bezel has seen better days ( sanded for paint lol)
*Center console
*Ash-tray
*Rear seats
*2 long black pieces that cover the door jams
*E brake cover.
*Under dash trim
*kick panels.( 2 sets to choose from)
*grey tweed glovebox

I don't know why I just listed all of that, I am sure you get the picture.
$125 firm takes it all. Don't want to seperate !!!!!
-5 speed swap!
Clutch pedal,
brake pedal,
master cylinder,
slave cylinder,
clutch line (hardline),
NON abs driveshaft,
S13 trans with no grinds,
s13 oem flywheel
(NO CLUTCH INCLUDED!)
$240 firm!!!
-Exterior panels-
- driver fender ( has minor dent) , painted b16 blue. -20
- Glass is all in good cond. pay before you pull ( make offers)
-(pop ups Hood )has baby bend near the windshield corner but not bad and not noticeable. -40
- Hatch with wing and glass(grey)-50
- Tail lights, pretty good shape- 20
- black center piece under the tail lights- 15
- Rear bumper frame ( metal bumper)- 20
- manual mirrors (pass missing glass)- 20
- Headlights and motors- 25
- Engine bay components- make offer ( no power steering or a.c. lines)
Anything not listed in make offer!!

__________________


Last edited by cagedeyecam; Nov 26, 2009 at 02:39 PM.
Yes but towards rear.
Core support is a little bent (can be banged right) from me laying the engine on it when installing.
Will sell once its in storage for 40.00 , you pull. or take the whole shell after I pull everything 80 rolling (just got to drill out the welds, dont it plenty of times before)
Core support is a little bent (can be banged right) from me laying the engine on it when installing.
Will sell once its in storage for 40.00 , you pull. or take the whole shell after I pull everything 80 rolling (just got to drill out the welds, dont it plenty of times before)
__________________


any way to sell the front bumper alone?
__________________
TURBO YOUR AE86 :]... or, whatever.
https://www.tamparacing.com/forums/n...-t-25-etc.html
AE86 mishimoto aluminum radiator
https://www.tamparacing.com/forums/t...ml#post8667139
TURBO YOUR AE86 :]... or, whatever.
https://www.tamparacing.com/forums/n...-t-25-etc.html
AE86 mishimoto aluminum radiator
https://www.tamparacing.com/forums/t...ml#post8667139
Yes but towards rear.
Core support is a little bent (can be banged right) from me laying the engine on it when installing.
Will sell once its in storage for 40.00 , you pull. or take the whole shell after I pull everything 80 rolling (just got to drill out the welds, dont it plenty of times before)
Core support is a little bent (can be banged right) from me laying the engine on it when installing.
Will sell once its in storage for 40.00 , you pull. or take the whole shell after I pull everything 80 rolling (just got to drill out the welds, dont it plenty of times before)
__________________


