Most parts were bought BNIB, have receipts for everything FWIW.

Located in Gainesville. Can make arrangements to meet or travel down south. Not making any special trips for one part, I might make a day of it if I have a bunch of stuff to sell. Will ship at your expense (+paypal fee). Reasonable offers welcome

No trades, I don't want your junk. .

Email: ryanfncrowson at gmail dot com

Motor:

We rebuilt the motor, so all new gaskets seals etc. Motor will need to be broken in! Small leak at the oil feed, before it's dropped in take it to a welder and give em 20 bucks to hit it with a fresh bead. Or JB weld it. (There's a -3AN fitting welded to the block that eliminates the banjo and crush washer system.) The new stuff have 0 miles on them. Almost everything else has <5000 miles.

Long block $1500
Valve cover to the oil pan. Will have flywheel, Greddy RAS, HKS step one cams, Apexi HG, ARP headstuds, Nismo tstat etc. Will not have accessories, exhaust manifold/turbo, fuel rail or injectors, or clutch.
http://c2.ac-images.myspacecdn.com/i...d3d04c4099.jpg
http://c3.ac-images.myspacecdn.com/i...c55374fb8e.jpg
http://c3.ac-images.myspacecdn.com/i...a26ec36f9e.jpg

If you want to add things to it you can choose from (or if you already have an SR):

S15 Spec R turbo package $750
Turbo (<5000 miles, NO shaft play, no smoke)
Stainless steel braided lines
Tubular manifold and copper exhaust manifold gasket
All new turbo gaskets
http://www.btyproductions.com/clawha.../FS/turbo1.JPG
http://www.btyproductions.com/clawha.../FS/turbo2.JPG

Custom S13 SR Wiring Harness $400
Braided sleeving, injector wires lengthened, maf wires lengthened to run under the dash and through the fender, body harness plug strands lengthened to run in fender, ingitors relocated inside with ECU, eleventy billion unused wires and plugs removed.
http://www.btyproductions.com/clawha...motor/Harness/

Greddy Hotpipe w/ HKS BOV $175 (with Recirc fitting)
http://www.btyproductions.com/clawhammer/240/FS/bov.JPG

SR Alternator $150 (Brand new remanufactured KA alternator ready to bolt to an SR)
http://www.btyproductions.com/clawha...0/FS/sralt.JPG
http://c4.ac-images.myspacecdn.com/i...d088060c53.jpg

Footwork stuffs:

Coils $1000 + your crap you'd throw away anyway
Stance GR+ Pro, <5000 miles on them, 8/6 springs loaded, 9/7 BNIB, wrenches, z32 lower mounts, z32 uprights, extra set of brand new camber plates.
http://www.btyproductions.com/clawha...S/footwork.JPG
http://c2.ac-images.myspacecdn.com/i...d4419f368d.jpg

Misc. crap: (this list will probably grow)

Shell $1000 Stock suspension, brakes, 4 lug. If you want any of that stuff add the prices from above to it. Will come with S14 seats, viper alarm/keyless, professional tintjob, lifetime alignment at Firestone, mint and very complete interior. Engine bay spray bombed black. Pignose front with some dents in the fenders. Dent in the rear 1/4 below the big body line on both sides from idiots that can't back out of a parking spot (body kit/valances would cover them, should be able to pop them out easily also.) PM for more details. I see way worse shells go for more, so save the whining for your mother.

Greddy Boost Gauge $150
Buy both get the pod free!
Greddy Oil Pressure Gauge $150
http://c2.ac-images.myspacecdn.com/i...9e2de98d2d.jpg

Complete SR Head $200
http://www.btyproductions.com/clawha.../sparehead.JPG

S14 Front Seats $150
http://www.btyproductions.com/clawha...0/FS/seat1.JPG
http://www.btyproductions.com/clawha...0/FS/seat2.JPG

Redline Goods Shift Boot $25 (Italian leather, red stitching)
http://www.btyproductions.com/clawha...nobandboot.JPG

Nismo Motor and Tranny Mounts $170 installed never used. New untorn exhaust bracket on tranny mount too!
http://www.btyproductions.com/clawha.../FS/mounts.JPG
http://www.btyproductions.com/clawha...FS/mounts1.JPG
http://www.btyproductions.com/clawha...FS/mounts2.JPG
http://www.btyproductions.com/clawha...FS/mounts3.JPG

Speed Panels with hardware $40
http://www.btyproductions.com/clawha...peedpanels.JPG

Chuki bumper $20 needs to be sanded
http://www.btyproductions.com/clawha.../redchuki1.JPG
http://www.btyproductions.com/clawha.../redchuki2.JPG
http://www.btyproductions.com/clawha.../redchuki3.JPG

Chuki bumper grills $10
http://www.btyproductions.com/clawha...hukigrills.JPG

SOHC Alternator $25
http://www.btyproductions.com/clawha...40/FS/alt1.JPG
http://www.btyproductions.com/clawha...40/FS/alt2.JPG

SOHC Dizzy and sweet OEM rubber cover $25
http://www.btyproductions.com/clawha...0/FS/dizzy.JPG

Random filter $20 could use a cleaning
T25 Turbo Outlet $20
http://www.btyproductions.com/clawha...bo%20stuff.JPG
^inlet sold

S13 Padded Cup Holder Console Lid! $50
http://www.btyproductions.com/clawha...cupholder1.JPG
http://www.btyproductions.com/clawha...cupholder2.JPG

Single DIN Triple Gauge Plate $10
http://www.btyproductions.com/clawha...gaugeplate.JPG

SOHC/SR MAFS $20 w/pigtail
http://www.btyproductions.com/clawha...0/FS/srmaf.JPG

 

why is there a new thread for this shit every day it seems?

 

Probably because your mom drank when she was pregnant with you.

Nah for real though I don't know...last time I bumped the last thread was last weekend haha. So it was like 2 weeks ago at least when I made that one, probably 3.

List keeps getting shorter, so woo. Make offers I people, I realize this is TR haha.

 

just asking !
no need to get all upset !

 

lol just fucking with ya!

!

 

TTT for a great seller and constant thread maker.

 

pm'd u

 

lol thanks Craig

 

Bump

 

Will be in 727 August 3 for Green Day. Taking orders now.