Front Mount Q
Front Mount Q
i just put a front mount on my SR, and its all hooked up except for the tiny hoses, the one that comes off the throttle body and the other that comes off the purge valve(i think its called). i put the stock blow off valve on it and ran the hose from the throttle body to the BOV, so my question is:
what do you do with the hose commin off the "purge valve"? (the gold circular thing on the turbo)
do you connect all three with a Y- connector?
what do you do with the hose commin off the "purge valve"? (the gold circular thing on the turbo)
do you connect all three with a Y- connector?
__________________
We Hope You Enjoy The Motor Sports!
1st off youre in f/s.
2nd, the "purge valve" is the wastegate.
and that needs to see boost. your best bet with that is to drill a hole as close as possible to the turbl outlet, buy a brass barb fitting and tap the hole you drilled for the thread on the other end of the barb fitting. make sure the outside diameter is the same as the line coming from your wastegate.
2nd, the "purge valve" is the wastegate.
and that needs to see boost. your best bet with that is to drill a hole as close as possible to the turbl outlet, buy a brass barb fitting and tap the hole you drilled for the thread on the other end of the barb fitting. make sure the outside diameter is the same as the line coming from your wastegate.
__________________
Nissan North America - Canton
Nissan North America - Canton
thanks, i reposted,
i bought a Gready kit tho, i dodnt think there would have to be any fab. to the kit itself
i bought a Gready kit tho, i dodnt think there would have to be any fab. to the kit itself
__________________
We Hope You Enjoy The Motor Sports!