Joined: Feb 2006

Posts: 157

Likes: 0

I have a complete 2.3 stroker bottom end,minus crank and arp's....Carillo rods with .020 over 8.5:1 Mahle pistons,Kiggly main girdle,a new set of Clevite bearings,that were only removed from the package for clearencing purposes,and the block that's bored and honed for the pistons. The block was zero decked and checked out perfect with the arp's in it.
The stuff has about 2500 miles on it,and is in beautiful condition. You could probably get away with re-using the rings,if $$ is tight.
All you need is a crank,arp's and maybe rings.

Askin $1000 obo

Cyclone intake with T25 actuator mod and epoxied to match 2g head ports $100

Evo VIII sodium filled ex. valves brand new still in the bags from mitsu $150

uncracked valve cover painted dark Ford blue with the good ceramic engine paint,and comes with a hollowed out pcv valve with an AN fitting welded to it for a catch can $50

N/A throttle body with sensors $50

Single Walbro 255 pump on AWD sending unit $100

non e prom ecm $75

3" gm maf with couplers $50

Contact Anthony 352-942-4856 call or text

This is out of a 93 AWD,so it's first gen stuff if it's not universal

Joined: Sep 2009

Posts: 351

Likes: 0

Joined: Feb 2006

Posts: 157

Likes: 0