2004 evo 8 for sale
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,932
Likes: 0
2004 evo 8 for sale
I have Evans evo here that I need to sell. Its a black wingless evo. It has a nice compliment of parts on it. Car will be sold quiet reasonable for the parts it has on it.
engine= built 2.3 with Buschur JE pistons and billet eagle crank and rods.
cams are HKS 272, could use more cam but it drives and idles very nice with these. Turbo is gt35r resting on a Full Race manifold/w tial wastegate. AEM tune on car was done with race gas by Brad Brooks. The fuel system was only able to support about 28psi where it made 517hp.
Car needs a 93 octane tune and some finishing touches. I will post pics this week and a complete list of mods. Car is very clean never in an accident. Times are tight so car is being sold cheap. looking for 20,000 for the car.
FIRE SALE NOW ON EBAY
http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123
engine= built 2.3 with Buschur JE pistons and billet eagle crank and rods.
cams are HKS 272, could use more cam but it drives and idles very nice with these. Turbo is gt35r resting on a Full Race manifold/w tial wastegate. AEM tune on car was done with race gas by Brad Brooks. The fuel system was only able to support about 28psi where it made 517hp.
Car needs a 93 octane tune and some finishing touches. I will post pics this week and a complete list of mods. Car is very clean never in an accident. Times are tight so car is being sold cheap. looking for 20,000 for the car.
FIRE SALE NOW ON EBAY
http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123
__________________
want a piece of the yellow car? (buy it)
you have to beat the blue car first
and then you have to take on the IV
my favorite quote
"if the solution is simple, God is answering"
want a piece of the yellow car? (buy it)
you have to beat the blue car first
and then you have to take on the IV
my favorite quote
"if the solution is simple, God is answering"
Last edited by lancerman; Mar 26, 2009 at 07:44 AM.
call me Gangsta boo
Joined: Oct 2004
Posts: 9,795
Likes: 0
Wow, good luck with the sale!!!! 
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,932
Likes: 0
2003 Mitsubishi Evolution 8 Tarmac Black w/30k miles and 2000 miles on new engine.
-2.3 Stroker *515 hp / 470 ft-lbs torque @ 25 lbs boost*
-Eagle Products 2.4 crank (700)
-Eagle Rods (300)
-JE Pistons from buschur racing (550)
-Over $500 in machine work on head and block (500)
-Piston rings, custom gapped to .018 and .022 for perfect compression
-Main bearings reach a .02 inch clearance and rods .015 inch clearance
-ClutchMasters STG4 clutch with 2k miles (Clutch pedal feel is close to stock, yet grips surprising well for the power levels) (600)
-Tial 50mm BOV and 44mm Wastgate (550)
-Full Race Exhaust Manifold and custom wastgate dump tube (1100)
-Garret GT35R w/S cover and Ported shroud for surging (1250)
-Ferrea valve springs and reatainers (250)
-HKS 272 intake/272 exhaust cams (300)
-Fidanza Cam gears (150)
-Powder coated valve cover (70)
-Auto Meter boost gauge (50)
-Custom 2.5" UICP
-SSAC FMIC w/Custom LICP (200)
-AEM EMS w/ wideband ecu system with race tune (1000)
-wideband (300)
-Aluminum radiator ( 150)
-6 AN fuel lines
-255 Walbro intank fuel pump and 255 inline fuel pump,plus over 10 hours of custom work (80)
-Aeromotive FPR (150)
-MSD 880 injectors (300)
-Custom 3" 1 piece 304 stainless steel exhaust/downpipe built by Glen (1100)
-Perrin fuel rail w/ custom honing to fit big injectors....over $200.00 in machine work (200)
-5 gallon fuel cell in trunk (for meth ot eth kit) -Battery ran to trunk to clean up engine bay
brand new very rare Wedssport TC-05 at 14.5lbs each (1800)
-Tein Springs (100)
-Pioneer HU *CD player*
~12,000 in aftermarket parts. labor not included.
-2.3 Stroker *515 hp / 470 ft-lbs torque @ 25 lbs boost*
-Eagle Products 2.4 crank (700)
-Eagle Rods (300)
-JE Pistons from buschur racing (550)
-Over $500 in machine work on head and block (500)
-Piston rings, custom gapped to .018 and .022 for perfect compression
-Main bearings reach a .02 inch clearance and rods .015 inch clearance
-ClutchMasters STG4 clutch with 2k miles (Clutch pedal feel is close to stock, yet grips surprising well for the power levels) (600)
-Tial 50mm BOV and 44mm Wastgate (550)
-Full Race Exhaust Manifold and custom wastgate dump tube (1100)
-Garret GT35R w/S cover and Ported shroud for surging (1250)
-Ferrea valve springs and reatainers (250)
-HKS 272 intake/272 exhaust cams (300)
-Fidanza Cam gears (150)
-Powder coated valve cover (70)
-Auto Meter boost gauge (50)
-Custom 2.5" UICP
-SSAC FMIC w/Custom LICP (200)
-AEM EMS w/ wideband ecu system with race tune (1000)
-wideband (300)
-Aluminum radiator ( 150)
-6 AN fuel lines
-255 Walbro intank fuel pump and 255 inline fuel pump,plus over 10 hours of custom work (80)
-Aeromotive FPR (150)
-MSD 880 injectors (300)
-Custom 3" 1 piece 304 stainless steel exhaust/downpipe built by Glen (1100)
-Perrin fuel rail w/ custom honing to fit big injectors....over $200.00 in machine work (200)
-5 gallon fuel cell in trunk (for meth ot eth kit) -Battery ran to trunk to clean up engine bay
brand new very rare Wedssport TC-05 at 14.5lbs each (1800)
-Tein Springs (100)
-Pioneer HU *CD player*
~12,000 in aftermarket parts. labor not included.
__________________
want a piece of the yellow car? (buy it)
you have to beat the blue car first
and then you have to take on the IV
my favorite quote
"if the solution is simple, God is answering"
want a piece of the yellow car? (buy it)
you have to beat the blue car first
and then you have to take on the IV
my favorite quote
"if the solution is simple, God is answering"
Last edited by lancerman; Sep 5, 2008 at 05:59 PM.
Registered User
Joined: Jul 2004
Posts: 6,494
Likes: 0
