Stock 1g Parts
My hours are getting cut at work and my bills remain the same. In short, I need some money. I only have stock parts, though. Here they are:
-"Pig tails" (i.e. plugs/wiring harnesses) for 2g MAS: $10
- Valve covers (stock DSM, "Hyundai" Hyundai, Completely shaved): I'll take $25 for the stock DSM covers *SOLD*, $35 for the stock Hyundai covers, and $60 for the shaved cover. However, I can refinish them in any color as I have here:

and the prices go to $50 for stock DSM covers *SOLD*, $60 for stock Hyundai covers, and $65 for the completely shaved cover. (NOTE: I only have "Hyundai" and shaved valve covers right now)
-Custom down pipe (it is a stock DP flange and a couple of inches of the stock DP welded to a 3" bend, flex, etc. - not the prettiest thing in the world, but it is 3"): $20
-CAS: $30 for '91-'92, $50 for "black top"
-Coil packs: $35 each
-Power transistors: $15 each
-1g o2 housings: $10 each
-1g exhaust manifold (turbo manual): $20
-Upper timing belt covers: $15 each
-ISC motors (used and tested good or rebuilt): $40 each
-Throttle bodies: $50 with all working sensors or, $35 without ISC motor, $25 without ISC motor or TPS
-EGR block-off plates: $5 each
-TPSs: $10 each
-BISS screws with o-rings: $5 each
-Idle switches: $5 each
-MPI relays (if you don't know, these go bad often enough in 1gs and the car is not driveable thereafter): $5 each
-1g tan leather rear seats: $15
-1g tan center console: $15
-"Pig tails" (i.e. plugs/wiring harnesses) for 2g MAS: $10
- Valve covers (stock DSM, "Hyundai" Hyundai, Completely shaved): I'll take $25 for the stock DSM covers *SOLD*, $35 for the stock Hyundai covers, and $60 for the shaved cover. However, I can refinish them in any color as I have here:
and the prices go to $50 for stock DSM covers *SOLD*, $60 for stock Hyundai covers, and $65 for the completely shaved cover. (NOTE: I only have "Hyundai" and shaved valve covers right now)
-Custom down pipe (it is a stock DP flange and a couple of inches of the stock DP welded to a 3" bend, flex, etc. - not the prettiest thing in the world, but it is 3"): $20
-CAS: $30 for '91-'92, $50 for "black top"
-Coil packs: $35 each
-Power transistors: $15 each
-1g o2 housings: $10 each
-1g exhaust manifold (turbo manual): $20
-Upper timing belt covers: $15 each
-ISC motors (used and tested good or rebuilt): $40 each
-Throttle bodies: $50 with all working sensors or, $35 without ISC motor, $25 without ISC motor or TPS
-EGR block-off plates: $5 each
-TPSs: $10 each
-BISS screws with o-rings: $5 each
-Idle switches: $5 each
-MPI relays (if you don't know, these go bad often enough in 1gs and the car is not driveable thereafter): $5 each
-1g tan leather rear seats: $15
-1g tan center console: $15
__________________
Last edited by AnthrAxNSB; Jul 29, 2006 at 11:48 PM.
Can you paint the valve cover in pearl magenta grey(the color of my 2g or something close to it) w/ polished lettering???if so i'll buy that from you...i saw the one victor bought from you and it looked really nice
__________________


and now introducing my newest toy...
-Silver Slow-poke-
I can paint the valve covers whatever color is preferred. However, I don't think I can get Magenta Pearl Grey (A87) at a price that would make the deal profitable. If there is a color you have in mind (mind you, I prefer to spray with a can) I'll spray it and send you a pic. You can tell me what you think.
I don't know what your paint looks like up close, so I can't really pull a can off the shelf and nail it. So, again, if you have a color in mind that I need to buy, let me know and I'll get it done.
Did Victor ever put that on his car?
I don't know what your paint looks like up close, so I can't really pull a can off the shelf and nail it. So, again, if you have a color in mind that I need to buy, let me know and I'll get it done.
Did Victor ever put that on his car?
__________________
Last edited by AnthrAxNSB; May 27, 2006 at 08:36 PM.
ok i'll get on that then...but as for victor yeah he finally put it on
Originally Posted by AnthrAxNSB
I can paint the valve covers whatever color is preferred. However, I don't think I can get Magenta Pearl Grey (A87) at a price that would make the deal profitable. If there is a color you have in mind (mind you, I prefer to spray with a can) I'll spray it and send you a pic. You can tell me what you think.
I don't know what your paint looks like up close, so I can't really pull a can off the shelf and nail it. So, again, if you have a color in mind that I need to buy, let me know and I'll get it done.
Did Victor ever put that on his car?
I don't know what your paint looks like up close, so I can't really pull a can off the shelf and nail it. So, again, if you have a color in mind that I need to buy, let me know and I'll get it done.
Did Victor ever put that on his car?
__________________


and now introducing my newest toy...
-Silver Slow-poke-
I have a '93 turbo throttle body and a '95 turbo throttle body. I have the '90 sensors though, if that's what you're looking for.
I can refinish the valve cover whatever color you would like, however I have no idea what firemist violet looks like. Do you have an idea where I could pick up the color?
I can refinish the valve cover whatever color you would like, however I have no idea what firemist violet looks like. Do you have an idea where I could pick up the color?
__________________


