I have some oem honda civic type r pistons for sale, 10.8:1 compression 81mm. Asking $100 firm and will ship if needed

Text
941-773-7484
Josh

 

Is it p73a0 or p73-00

 

Dont think its either, this is what i found online..

JDM Honda PCT Type R Piston Sets Standard Size
Item# 13010-PCT-000



[h=2]Product Description[/h]This is a sale for 4 units of brand new genuine JDM Honda Civic EK9 Type R PCTX Piston Set Standard Bore Size from Honda Motors, Japan. All piston sets come with a wrist pin.

Excellent in all-motor application, these Civic EK9 Type R PCTX 81mm pistons are of a high-pressure die cast construction. It has a black dry molybdenum film lubricant coating on the skirts for longer wear and less friction, as well as additional oil holes in the ring grooves for better high rpm oil control. These pistons also have holes in the wrist pin bosses to improve wrist pin oiling. The PCTX piston has the highest dome of all the Type R pistons. When installing these pistons care must be taken to ensure the correct final compression ratio is achieved and that no interference will occur.

Fitment includes B16A, B17A, B18C, B18C5 or B18C Type R.

For B16A & B17A, 1-mm of material on each side of the small end of the stock connecting rod must be removed to have sufficient clearance where the rod meets the piston.

[TABLE="align: center"]
[TR]
[TD="colspan: 2"]Approximate Compression Ratio for Engine-PCTX Piston Mixes
[/TD]
[/TR]
[TR]
[TD]ENGINE
[/TD]
[TD]COMPRESSION RATIO
[/TD]
[/TR]
[TR]
[TD]B16A
[/TD]
[TD]11.1
[/TD]
[/TR]
[TR]
[TD]B17A
[/TD]
[TD]11.4
[/TD]
[/TR]
[TR]
[TD]B18C with GSR head.
[/TD]
[TD]11.8
[/TD]
[/TR]
[TR]
[TD]B18C with Type R or B16 head.
[/TD]
[TD]11.6
[/TD]
[/TR]
[/TABLE]

 

$100 firm

 

Are they used or bnib?

 

I had them in my CTR and decided to build the motor, car had 64k kilometers, didnt smoke, rings are still good and everything

 

ttt