Fs: Bnib buddy club spec 3 + camshafts b series vtec
Thread Starter
Not harsh, just truthful
Joined: Jul 2007
Posts: 5,709
Likes: 0
Fs: Bnib buddy club spec 3 + camshafts b series vtec
As stated in thread title, i have some Buddy Club Spec 3 + camshafts (fit all b series vtec heads B16/B17/B18C/B18C5/6). They are a little larger then ITR/CTR cams. They are BNIB meaning they have not seen 1 mile. Selling to go with a larger set of cams. I am looking for $450 firm. This is a steal for a BNIB set of these.NO TRADES NO TRADES NO TRADES
Information sourced from Inline Four:
Spec III cams are made with chilled cast cores to increase strength and optimize primary and VTEC lobes. Spec III plus were designed to accommodate compression ratios from 10.0:1 to 13+.
Specifications:
Intake: 304 duration/11.59 mm lift
Exhaust: 294 duration/10.71mm lift.
Location is Brandon. Contact number is 813-481-5460
Pictures will be provided to serious inquires if necessary. I wouldn't do anyone dirty, check my trade rating.
Please bump if viewed.
Information sourced from Inline Four:
Spec III cams are made with chilled cast cores to increase strength and optimize primary and VTEC lobes. Spec III plus were designed to accommodate compression ratios from 10.0:1 to 13+.
Specifications:
Intake: 304 duration/11.59 mm lift
Exhaust: 294 duration/10.71mm lift.
Location is Brandon. Contact number is 813-481-5460
Pictures will be provided to serious inquires if necessary. I wouldn't do anyone dirty, check my trade rating.
Please bump if viewed.
Last edited by Paulino; May 11, 2011 at 01:25 PM.
formerly D00MSB08
Joined: Jan 2007
Posts: 3,790
Likes: 0
![Ls_[eg]hatch's Avatar](https://www.tamparacing.com/forums/customavatars/avatar37445_20.gif){kind=avatar}
