FS: Fully Built Sohc 500hp ready
FS: Fully Built Sohc 500hp ready
500hp ready sohc. Motor has 108 Miles since the build it is still being broken it and still in my car, has not seen boost yet. Price is $1000 for full swap with out turbo kit. Motor was built by the best in miami South Florida.
786-312-8781
Block:
D16y7
cometic 3 layer head gasket
Vitara 8:1:1 Pistons
Eagle h beam rods
Arp Rod bolts
Knife edged and polished crank
Acl rod and main bearings
Modified z6 water pump oem
modified z6 oil pump modified
Oem timing belt
block was bored to 75.5 hot tanked and decked.
Head:
z6 head
fresh out the shop
zex stage 2 turbo cam
stock valve train
aem cam gear
Arp head studs
new valve cover gasket
Tranny:
Y8 short gear transmission (Freshly rebuilt for my setup)
Act 4 puck unsprungs clutch
Act pressure plate
new throw out bearing
new oem axles
Motor is still in car running until someone buys it
786-312-8781
Block:
D16y7
cometic 3 layer head gasket
Vitara 8:1:1 Pistons
Eagle h beam rods
Arp Rod bolts
Knife edged and polished crank
Acl rod and main bearings
Modified z6 water pump oem
modified z6 oil pump modified
Oem timing belt
block was bored to 75.5 hot tanked and decked.
Head:
z6 head
fresh out the shop
zex stage 2 turbo cam
stock valve train
aem cam gear
Arp head studs
new valve cover gasket
Tranny:
Y8 short gear transmission (Freshly rebuilt for my setup)
Act 4 puck unsprungs clutch
Act pressure plate
new throw out bearing
new oem axles
Motor is still in car running until someone buys it
Last edited by cleanazcoupe; 11-20-2010 at 01:36 PM. Reason: Rule 7. No 'testing the waters' or 'possibly for sale' posts.
FS: Fully Built Sohc 500hp ready
500hp ready sohc. Motor has 108 Miles since the build it is still being broken it and still in my car, has not seen boost yet. Price is $1000 for full swap with out turbo kit. Motor was built by the best in miami South Florida.
786-312-8781
Block:
D16y7
cometic 3 layer head gasket
Vitara 8:1:1 Pistons
Eagle h beam rods
Arp Rod bolts
Knife edged and polished crank
Acl rod and main bearings
Modified z6 water pump oem
modified z6 oil pump modified
Oem timing belt
block was bored to 75.5 hot tanked and decked.
Head:
z6 head
fresh out the shop
zex stage 2 turbo cam
stock valve train
aem cam gear
Arp head studs
new valve cover gasket
Tranny:
Y8 short gear transmission (Freshly rebuilt for my setup)
Act 4 puck unsprungs clutch
Act pressure plate
new throw out bearing
new oem axles
Motor is still in car running until someone buys it
Uploaded with ImageShack.us
786-312-8781
Block:
D16y7
cometic 3 layer head gasket
Vitara 8:1:1 Pistons
Eagle h beam rods
Arp Rod bolts
Knife edged and polished crank
Acl rod and main bearings
Modified z6 water pump oem
modified z6 oil pump modified
Oem timing belt
block was bored to 75.5 hot tanked and decked.
Head:
z6 head
fresh out the shop
zex stage 2 turbo cam
stock valve train
aem cam gear
Arp head studs
new valve cover gasket
Tranny:
Y8 short gear transmission (Freshly rebuilt for my setup)
Act 4 puck unsprungs clutch
Act pressure plate
new throw out bearing
new oem axles
Motor is still in car running until someone buys it
Uploaded with ImageShack.us
Last edited by chi town brat; 11-20-2010 at 05:15 AM. Reason: Rule 7. No 'testing the waters' or 'possibly for sale' posts.
wtf is that dog real... wasnt expecting that bump
does not look like a z6 head to me, if it was the spark plugs would be aim toward the front of the hood not the back, and a z6 head is vtec not none vtec i know some z6 valve covers does not say vtec but i can post pics of my fully built 13 to 1 comp d16z6
it looks clean.... but you claim 500hp ready yet it hasnt even seen boost yet? just doesnt make sense to me....why build a motor then not even run it? idk, just throws a red flag for me.
__________________
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
Thats not even your motor lol thats a f series accord motor wtf kids on tr kill me.
http://www.honda-tech.com/showthread.php?t=1824166
http://www.honda-tech.com/showthread.php?t=1824166
__________________
Last edited by 96ek; 11-20-2010 at 04:07 AM.