FS: Built GSR Head
Thread Starter
wrd.
Joined: Dec 2006
Posts: 5,248
Likes: 0
FS: Built GSR Head
Selling my built GSR Head off of my motor. Head has port work done to it, with roughly 25,000 miles on the setup. All top end gaskets were replaced during the rebuild, I.E. Valve Seals, ETC. Will come with JDM GSR Cams,Vtec Solenoid and OBII Distributor. -- Essentially complete. I have a Skunk2 intake manifold and OEM GSR throttle body that can come along with it for some extra money.
The head is in absolute immaculate shape. There is no gunk or oil deposits. Completely spotless. Here's what the head-work consists of.
-Omni Power Dual Titanium Valve Springs
-Omni Power Titanium Retainers
-Omni Power Stainless Steel High Compression Valves
-Full Port and Polished Head
-H22 Lost Motion Assembly's
Picture is kinda blurry.. but makes the point. If you're truly interested feel free to contact me and I can setup a time where you can come personally take a look at the part.
Asking 600.00 OBO
The head is in absolute immaculate shape. There is no gunk or oil deposits. Completely spotless. Here's what the head-work consists of.
-Omni Power Dual Titanium Valve Springs
-Omni Power Titanium Retainers
-Omni Power Stainless Steel High Compression Valves
-Full Port and Polished Head
-H22 Lost Motion Assembly's
Picture is kinda blurry.. but makes the point. If you're truly interested feel free to contact me and I can setup a time where you can come personally take a look at the part.
Asking 600.00 OBO
__________________
"Success is 99% failure" -Soichiro Honda
"Success is 99% failure" -Soichiro Honda
Last edited by kumar.; Jul 29, 2010 at 08:14 AM.
