FS: Bseries parts "cams-toda/skunk2-CTR pistons-act flywheel-crx loweringsprings Etc
Thread Starter
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
FS: Bseries parts "cams-toda/skunk2-CTR pistons-act flywheel-crx loweringsprings Etc
i have tons of parts and will be moving soon so given you some nice cheap prices
THEN i have a NEW set of CTR 81.5mm .20oversized with NEW rings and if you bring your rods i will press them on for you free---125$
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-21
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-21
4th another new set of crx lowering springs they are very well made not cheap with a highspring rate so no shitty bounching-45$
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-20
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-20
im sure i have more but will need to get pictures..here is the link from phearable for all the cam specs i know i have 2more set of cams but need to find them
http://www.phearable.net/tech/cams.txt
THEN i have a NEW set of CTR 81.5mm .20oversized with NEW rings and if you bring your rods i will press them on for you free---125$
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-21
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-21
4th another new set of crx lowering springs they are very well made not cheap with a highspring rate so no shitty bounching-45$
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-20
Shot with KODAK EASYSHARE M1063 DIGITAL CAMERA at 2009-10-20
im sure i have more but will need to get pictures..here is the link from phearable for all the cam specs i know i have 2more set of cams but need to find them
http://www.phearable.net/tech/cams.txt
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Last edited by rangcrx; Nov 1, 2009 at 03:35 AM.
Registered User
Joined: Sep 2007
Posts: 1,368
Likes: 0
whats the height on the lowering springs (if you know?)
__________________
'05 Kia Spectra5-now my fathers DD
'67 English Ford Cortina w/2.3 thunderbird turbo eng
...under construction
'99 ek...traded
'95 b16 eg hatch...traded
'92 DA...parted out
'89 CRX Si...traded
'93 Prelude Turbo...sold
'96 ek coupe...traded
'97 ek 4dr...sold
'96 Jeep Grand Cherokee
'98 Mustang GT
"You may get me off the line, but you know who daddy is!"
'05 Kia Spectra5-now my fathers DD
'67 English Ford Cortina w/2.3 thunderbird turbo eng
...under construction '99 ek...traded
'95 b16 eg hatch...traded
'92 DA...parted out
'89 CRX Si...traded
'93 Prelude Turbo...sold
'96 ek coupe...traded
'97 ek 4dr...sold
'96 Jeep Grand Cherokee
'98 Mustang GT
"You may get me off the line, but you know who daddy is!"
![Ls_[eg]hatch's Avatar](https://www.tamparacing.com/forums/customavatars/avatar37445_20.gif){kind=avatar}
Mr. Stealyogirl
Joined: Oct 2006
Posts: 4,638
Likes: 0
Pops
Joined: Oct 2008
Posts: 2,095
Likes: 0
Rangcrx with the best parts once again. If you keep helping everyone else get faster we will be forced to replace the motors you built for us and replace with single cams auto's......LOL bump for you sir
__________________
Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
Thread Starter
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
i would like to find some nice black seats bucketstyle
around 1.5/1.8 just puts the wheel even with the fender no tucking or camber problems
i would never use aluminum again steel is the only way to go i think its 11lbs gotta check Act
around 1.5/1.8 just puts the wheel even with the fender no tucking or camber problems
i would never use aluminum again steel is the only way to go i think its 11lbs gotta check Act
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Cold Ass Honky
Joined: Aug 2007
Posts: 5,067
Likes: 0
Bump for the best engine builder in Tampa!
Thread Starter
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
Ttt
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
