FS: B18C GSR Mains/Girdle/windage/pickup/oilpan - Pictures
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
FS: B18C GSR Mains/Girdle/windage/pickup/oilpan - Pictures
I have JDM GSR main caps with girdle,i also have..
SOLD
Oil pick up
windage trey
oil pan
The GSR that it was from threw a rod and wore a groove in the windage trey,and nickked the oil pan. The windage trey should be ok to use with out problems,same goes with the pick up..
The main caps/Girdle have low miles and are in great condition been kept in brown wrapping paper and oiled occationally. GREAT SHAPE comes with bolts too.
The oil pan is stamped P72 on the bottom.Like i said before the broke rod came in contact with the oil pan. It DID have a small hole in the side,but i welded the hole shut grinded it and welded and grinded again. I also put JB weld just to seal it for sure. Its been painted over. SHOULD hold oil no problems.
ALL THIS FOR 50$ OBO Pictures are of any flaws if any and repairs.
SOLD
Oil pick up
windage trey
oil pan
The GSR that it was from threw a rod and wore a groove in the windage trey,and nickked the oil pan. The windage trey should be ok to use with out problems,same goes with the pick up..
The main caps/Girdle have low miles and are in great condition been kept in brown wrapping paper and oiled occationally. GREAT SHAPE comes with bolts too.
The oil pan is stamped P72 on the bottom.Like i said before the broke rod came in contact with the oil pan. It DID have a small hole in the side,but i welded the hole shut grinded it and welded and grinded again. I also put JB weld just to seal it for sure. Its been painted over. SHOULD hold oil no problems.
ALL THIS FOR 50$ OBO Pictures are of any flaws if any and repairs.
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Last edited by integra; May 25, 2009 at 01:20 PM.
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
Lmk
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
ttt
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
B18Cya
Joined: Dec 2007
Posts: 920
Likes: 0
ttt
__________________
circuit-racer.com
Garage Kept.
WATCH: http://www.blip.tv/file/464022
TR "Old Skool EF" Member #79
circuit-racer.com
Garage Kept.
WATCH: http://www.blip.tv/file/464022
TR "Old Skool EF" Member #79
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
i have 3 rods
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Cold Ass Honky
Joined: Aug 2007
Posts: 5,067
Likes: 0
Bump for a fellow B18c'er!
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
thanks for the bump
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
