FS: Built k24a4/k20a2 long block - Pictures
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
FS: Built k24a4/k20a2 long block - Pictures
I have for sale a K24a4/k20a2 long block that i would like to sell.
i will sell seperate or i will sell just the bottome end. If no one wants the block,I will NOT sell the head.
Block consist of-
K24a4 block 88mm
Weisco 88mm 10.2 compression pistons (part number K568m88 )
IB spec H beam Rods-brand new
stock crank
Type S pump modified
Type S oil pump baffle
Golden Eagle headstuds-brand new
ARP Mainstuds
Supertech blockguard
Type S oil pan
Brand new piston rings-0Miles
Brand new bearings-0Miles
Brand New cometic headgasket-0miles
timing chain
timing cover
tensioner
crank pulley
water pump housing and pump
Looking for $2500
I also have a 03 K20a2 head that is all stock with 49k miles. I got this head from civic5133(cody) had it pressure tested and everything was all good.
It comes complete with intake manifold but no TB or Injectors,pretty much just head,intake manifold,and fuel rail.
Looking for $750
But like i said i will not sell the head unless the bottom end sells or if you want the complete long block.
LONGBLOCK-$3000
DTR and RBC not included Motor has never seen nitrous.
i will sell seperate or i will sell just the bottome end. If no one wants the block,I will NOT sell the head.
Block consist of-
K24a4 block 88mm
Weisco 88mm 10.2 compression pistons (part number K568m88 )
IB spec H beam Rods-brand new
stock crank
Type S pump modified
Type S oil pump baffle
Golden Eagle headstuds-brand new
ARP Mainstuds
Supertech blockguard
Type S oil pan
Brand new piston rings-0Miles
Brand new bearings-0Miles
Brand New cometic headgasket-0miles
timing chain
timing cover
tensioner
crank pulley
water pump housing and pump
Looking for $2500
I also have a 03 K20a2 head that is all stock with 49k miles. I got this head from civic5133(cody) had it pressure tested and everything was all good.
It comes complete with intake manifold but no TB or Injectors,pretty much just head,intake manifold,and fuel rail.
Looking for $750
But like i said i will not sell the head unless the bottom end sells or if you want the complete long block.
LONGBLOCK-$3000
DTR and RBC not included Motor has never seen nitrous.
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Last edited by integra; Apr 24, 2010 at 01:16 PM.
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
thanks fellas
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Thread Starter
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
ttt
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
good price bump!
