** bseries turbo part out and built motor and head**
Thread Starter
Registered User
Joined: May 2006
Posts: 218
Likes: 0
** bseries turbo part out and built motor and head**
parting out my turbo setup due to a family situation. prices are obo plus shipping
also selling a fully built ls block and head never used
b18b1 head- ferrea .5 oversized valves, crower springs and retainers, port and polished. all it needs is the cams and valve cover all professionally installed by jackson cylinder head
-$500 obo
b18a block- weisco pistons 8:5:1 compression and Eagle H-Beam Rods stock sleeves 81.5 mm, micropolished crank, acl rod and main bearings, block gaurd professionally installed by jackson cylinder head, honed by jackson cylinder head, type R oil pump obdII, turbo cosmetic head gasket .
SOLD
LOCATED IN ORLANDO
Brand new AFI A/C PS compatible ramhorn manifold, T3 flange-$550
Brand new AFI A/C compatible 3in dp- $180
44mm tial wastegate used for 1000 miles, 8 psi spring- $250
T3/T4 60-1 innovative turbo with inclonel wheel, .63 exhaust housing, 0 miles since rebuilt- SOLD
oil feed/ return lines, oil cooler and oil filter relocation kit-SOLD
tial bov used, good condition. no spring in it- SOLD
brand new pro sport boost, oil pressure, oil temp, and water temp gauges- SOLD
custom made intercooler 28x3.5x8in- $180
arp head studs torqued once but never used on a running car- $70
tunertoys 440cc saturated injectors- SOLD
ls oil pan no dents, good condition, untapped- $30
ls dizzy obd1 with new cap in good condition- $50
also selling a fully built ls block and head never used
b18b1 head- ferrea .5 oversized valves, crower springs and retainers, port and polished. all it needs is the cams and valve cover all professionally installed by jackson cylinder head
-$500 obo
b18a block- weisco pistons 8:5:1 compression and Eagle H-Beam Rods stock sleeves 81.5 mm, micropolished crank, acl rod and main bearings, block gaurd professionally installed by jackson cylinder head, honed by jackson cylinder head, type R oil pump obdII, turbo cosmetic head gasket .
SOLD
LOCATED IN ORLANDO
Brand new AFI A/C PS compatible ramhorn manifold, T3 flange-$550
Brand new AFI A/C compatible 3in dp- $180
44mm tial wastegate used for 1000 miles, 8 psi spring- $250
T3/T4 60-1 innovative turbo with inclonel wheel, .63 exhaust housing, 0 miles since rebuilt- SOLD
oil feed/ return lines, oil cooler and oil filter relocation kit-SOLD
tial bov used, good condition. no spring in it- SOLD
brand new pro sport boost, oil pressure, oil temp, and water temp gauges- SOLD
custom made intercooler 28x3.5x8in- $180
arp head studs torqued once but never used on a running car- $70
tunertoys 440cc saturated injectors- SOLD
ls oil pan no dents, good condition, untapped- $30
ls dizzy obd1 with new cap in good condition- $50
Last edited by tegratuner451; Oct 3, 2007 at 01:06 PM. Reason: drop in prices
TR Balla Donor Supreme
Joined: May 2004
Posts: 2,478
Likes: 0
what kind of core was used on the intercooler?
__________________
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
