i need front and back...will take camber kit, adj upper control arms, bolts with washers for the barck...pretty much anything to make my wheels str8.

 

you can go to home depot or Tri City bolt to get the hardware for the back...

stainless washers and a coupla grade 8 bolts will run you like $10.
as for the front, AE has the skunk2 uppers, or you could order the little camber brackets off ebay, they are like $65ish for the pair.

just so you know - BUMP!

 

what do you think of these??? am i suposed to reuse my ball joints?
thanx


http://cgi.ebay.com/ebaymotors/HONDA...61463165QQrdZ1

 

ttt

 

i would assume with those that you have to buy a pair of ball joints, take them to a machine shop, and have them pressed onto the control arm.

http://www.partstrain.com/products/E...C-DX3-004.html
this page is some generic ball joints, $33-43 each. so with the $70 control arms, and $10-20 install fee (cuz shops try to screw you like that) you are in the $150-170 range. i would personally rather call it a day, go buy some Skunk2s or similar, bolt em on out of the box, and drive off. but thats just me.

http://www.sportcompactonly.com/prod...tm_medium=shop
skunk2 front arms for $169

GL man

 

actually i can press em in and out and my ball joins are already brand new....so it would only cost me the $70...but i see where your comming from if i had to buy new ones and have em pressed in id just get sk2's ...i think a/e has the sk2's for around the same price as above....with that being said the $70 ones cant be all that bad, can they?

thanx

 

i think i have some ajustable camber arms layin around, if i can find them you can have them for 50

 

I have an ingalls front camber kit. $75
Application:88-00 civic 94-00 integra.

 

haha there ya go... i got the ingalls back, and its good stuff for the price... but hey, if ur ball joints are new then just throw them bitches on there...

or buy silvciv's fronts....

 

i think im just gonna get the ebay kit and use some washers on the back....thanx everyone.