For sale!!! (greddy turbo kit eg a/c etc)
Thread Starter
Drive it like it's a Taco
Joined: Sep 2003
Posts: 976
Likes: 0
For sale!!! Turbo kit/ full a/c/ d16z6 motor!
Selling the following!! 
all the motor parts have less than 1,600 miles on them.
turbo stuff has less than 3,000 miles on it.
d16z6 swap!
does not include: ECU, exhaust manifold, or air intake
d16z6 fully stock rebuilt only 1,500 miles on it currently
block has hot tanked and honed
head was hot tanked
new main and rod bearings
new piston rings
new all gaskets & seals
new plugs/wires/cap/rotor
new timing belt
new water pump
new drive belts
Si transmission
resurfaced flywheel
new excedy stage1 clutch and pressure plate
Greddy 15g turbo kit for d series motors. (kit is A/C compatible)
kit includes:
tdo4h 15g turbo
Downpipe
Front mount intercooler (not sure on brand or size yet ill measure later)
All intercooler piping, clamps,hoses,fitings
steel braided feed line and return line
Turbo xs type H BoV (bung wleded onto charge pipe)
Turbo xs manual boost controler (BC-HPBC)
d16z6 oil pan already tapped out for oil line
p28 socketed/chipped. ecu is setup with crome pro tuned by our very own john vega (mtber)
complete a/c system 92-95 in working condition!
all lines
condensor
compressor
dryer
fan
2, count em 2 evaparators (1 very small leak, 1 perfectly ok)
TAKING REASONABLE OFFERS ON EVERYTHING!!!
all the motor parts have less than 1,600 miles on them.
turbo stuff has less than 3,000 miles on it.
d16z6 swap!
does not include: ECU, exhaust manifold, or air intake
d16z6 fully stock rebuilt only 1,500 miles on it currently
block has hot tanked and honed
head was hot tanked
new main and rod bearings
new piston rings
new all gaskets & seals
new plugs/wires/cap/rotor
new timing belt
new water pump
new drive belts
Si transmission
resurfaced flywheel
new excedy stage1 clutch and pressure plate
Greddy 15g turbo kit for d series motors. (kit is A/C compatible)
kit includes:
tdo4h 15g turbo
Downpipe
Front mount intercooler (not sure on brand or size yet ill measure later)
All intercooler piping, clamps,hoses,fitings
steel braided feed line and return line
Turbo xs type H BoV (bung wleded onto charge pipe)
Turbo xs manual boost controler (BC-HPBC)
d16z6 oil pan already tapped out for oil line
p28 socketed/chipped. ecu is setup with crome pro tuned by our very own john vega (mtber)
complete a/c system 92-95 in working condition!
all lines
condensor
compressor
dryer
fan
2, count em 2 evaparators (1 very small leak, 1 perfectly ok)
TAKING REASONABLE OFFERS ON EVERYTHING!!!
__________________
Contact me:
Adam B.
Cell: (727) 742-0633
Contact me:
Adam B.
Cell: (727) 742-0633
Last edited by FL_civic_rider; Aug 27, 2005 at 11:24 AM.
Thread Starter
Drive it like it's a Taco
Joined: Sep 2003
Posts: 976
Likes: 0
**someone is currently interested in buying every as of (8/27/05). I'll let everyone know the status of it asap**
REDchirp - asking $1,600 for the turbo kit. it has less than 3,000 miles and includes (all piping/bov/mbc/fmic/turbo/ecu chipped socketed & tuned/lines,clamps,hoses/tapped oil pan)
98TRDCam - ^ ^ ^ less than 3,000 miles and im asking 1,600 for everything above.
REDchirp - asking $1,600 for the turbo kit. it has less than 3,000 miles and includes (all piping/bov/mbc/fmic/turbo/ecu chipped socketed & tuned/lines,clamps,hoses/tapped oil pan)
98TRDCam - ^ ^ ^ less than 3,000 miles and im asking 1,600 for everything above.
__________________
Contact me:
Adam B.
Cell: (727) 742-0633
Contact me:
Adam B.
Cell: (727) 742-0633
Thread Starter
Drive it like it's a Taco
Joined: Sep 2003
Posts: 976
Likes: 0
OK NEW IDEA!
looking to trade the complete turbo kit - ecu - and wire harness with resistor box and injectors
for a header/intake/stock p28 and stock uncut harness ++ cash.
lmk!
looking to trade the complete turbo kit - ecu - and wire harness with resistor box and injectors
for a header/intake/stock p28 and stock uncut harness ++ cash.
lmk!
__________________
Contact me:
Adam B.
Cell: (727) 742-0633
Contact me:
Adam B.
Cell: (727) 742-0633
