86' 305 Sbc. 500 miles since rebuild. This is for the block/internals only. Comes with oil pan. The cam is out of the motor, as are the lifters, I still have them. Stock cam. The pass. side need to be honed and possibly new rings. The motor was in the back of a truck and fell over and apparently got rained on. The pass side cylinders have surface rust. I have a set of 305 heads and a set of 350 heads i will send with the motor incase you decide to bore it out. It is a 2 bolt main and I believe it has a 1 pc rms. The motor ran wonderfully in the car it was in before it was taken out. It was going to be put into an 86 caddy but after the project was near completion the owner told me he wouldn't be able to afford it and sold the car minus my motor. It was rebuild by victory race engines who are out of PA or something. i bought it off ebay originally. I'll take $150 for it. As i posted before It needs the pass side cylinders honed and possibly new rings. I have 305 and 350 882 heads. Not the ones that came with the engine but they are good heads.

Dallas