I am selling the aluminum 317 casting number heads off of my 20k mile lq9 motor as well as a GMPP hot cam. The heads and cam will fit any ls motor and have the same intake and exhaust runners as the venerable ls6 heads. The combustion chamber is a larger 72 cc on the 317 head versus the 64 cc chamber of the ls6 head so they are perfect for forced induction ls motors. The cam pulls hard from idle to 6500 rpm with tons of torque the specs are 219 int 228 exh .525 lift intake and exhaust on a 112 lsa. The cam does have a mild lope but nothing crazy but if you want the racy idle you could always back it down a touch. Everything is in geat shape and ready to go. I also have some 7.425 manley chromoly pushrods which are used with the z06 camshaft that I no longer have.

Heads $300
Cam $300
Pushrods $90

I usually have my little brother list things on here for me CobraspdRH because I dont make it on here too much but he's got alot going on right now so feel free to check his feedback b/c alot of the parts he's listed were mine. PM post or call me with any questions. 813 743 8659 Chris

 

Heres some pics of the parts

 

Sold the pushrods.

 

small world. I have been watching your turbo regal LS1 build on TM.com for a few years now. great price on the 317s, good luck with the sale.

 

Thanks. Now its an 530hp iron block ls2 with a t-56. Its funny this is the exact engine I was gonna put in until I decided to go turbo. Now 2 years later its going in again. Go figure.

 

Sold the cam. All thats left is the heads. Takers??

 

Interested, PM sent.

-Mike