350 block (LS based) 4 bolt mains bored .030 over
new stock replacement crank with clevite bearings

stock rods- magnufluxed

brand new hypereutectic pistons with power seal rings

9:1 compression

CAM is .465 lift intake .488 exhaust 224dur intake 234dur exhaust @.050 114 lobe center rpm range 1500rpm - 5250 rpm

hydraulic lifters

Edelbrock torker II intake (read above notes)

new shorty block hugger headers wrapped in header tape

heads are stock 1.72 1.50 iron but polished ports with casting out. mildly ported and heads, intake, headers are port matched. all springs, valves, and rockers checked and replaced where needed

hei dizzy

chrome valve covers and air cleaner

new waterpump

new starter

painted chevy orange\red

will conservatively make about 275 hp

brand new engine 0 miles

Now, This was originaly bought for my Bravada/S10 Blazer V8 conversion but since I would like to finish my All-Trac this year It might need to be sold.


I DO NOT need to sell it but It would be nice to get some extra cash, this is a $2000 engine all day long.

I also have everything to convert the 4x4 S10 Blazer/Truck into a S10-V8. I will include everything needed for an extra $500 (cost me $800)


$1000- just engine