Aluminum stroker Teksid short block - Forged
Aluminum stroker Teksid short block - Forged
302ci Aluminum stroker block and forged crank from Coast High Performance, Forged H-Beam Rods, 7 Probe STD bore forged dished pistons.
Standard bore aluminum Teksid block with 3.75" stroke crank. This block was in the former MM&FF Project car Icebox.
With this combo I made 618/625 at the wheels on pump gas with 2V TFS heads and a 1.9L PD blower. It's built to hold 1000HP.
The number 6 piston was beat to crap but when we pulled the engine apart the head was intact. Looking at the block the cylinder looks fine but it probably wouldn't hurt to have it ball honed to be sure. It will definitely need one more piston and to be reassembled. This combo new was well over $2,500. First $1,200 takes it and I'll deliver it to you semi locally.
Text 727-386-8654 for more info.
[ATTACH=CONFIG]189176[/ATTACH]
[ATTACH=CONFIG]189177[/ATTACH]
[ATTACH=CONFIG]189178[/ATTACH]
Standard bore aluminum Teksid block with 3.75" stroke crank. This block was in the former MM&FF Project car Icebox.
With this combo I made 618/625 at the wheels on pump gas with 2V TFS heads and a 1.9L PD blower. It's built to hold 1000HP.
The number 6 piston was beat to crap but when we pulled the engine apart the head was intact. Looking at the block the cylinder looks fine but it probably wouldn't hurt to have it ball honed to be sure. It will definitely need one more piston and to be reassembled. This combo new was well over $2,500. First $1,200 takes it and I'll deliver it to you semi locally.
Text 727-386-8654 for more info.
[ATTACH=CONFIG]189176[/ATTACH]
[ATTACH=CONFIG]189177[/ATTACH]
[ATTACH=CONFIG]189178[/ATTACH]
__________________
2013 Base Mustang GT - Tampa Stock
2013 Base Mustang GT - Tampa Stock
Last edited by N20D5OH; 08-09-2012 at 10:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post