complete built t-56 foxbody swap twin disk clutch quicktime bell ect.. PICS*
i ran 9.2x with the combination decided to go auto since i wrecked the car 6th gear is removed but can be reinstalled i had all the work done by astro performance in orlando florida list below is everything included
the straps on the floater plate on the twin disk clutch are toast but everything else is in good working order i dont know how long they have been broken but im sure for quite a while it has never acted any differently just get the rattle when the clutch is disengauged which is normal. i ran 1000+ hp through the tranny and clutch and had no issues still shift damn smooth and effortless
-magnum t-56 cryo treated and rem polished 6-gear removed (but is included)
-quicktime bellhousing for 302/351
-steeda tri ax handle for shifter
-crossmember for foxbody
-hurst shift knob with button built in
-clutch cable
-quadrant
-fork / throwout bearing
-ram twin disk clutch with 300 series disks flywheel is 28oz balance (straps broke on floater plate but never had an issue with it can be sent back to ram and rebuilt)
-strange 1350 yoke (rest of driveshaft not included)
these tansmissions alone new are $2800, i need to get $3200 for this complete kit
im located in area code 34695 shipping would be a bitch would rather not ...





the straps on the floater plate on the twin disk clutch are toast but everything else is in good working order i dont know how long they have been broken but im sure for quite a while it has never acted any differently just get the rattle when the clutch is disengauged which is normal. i ran 1000+ hp through the tranny and clutch and had no issues still shift damn smooth and effortless
-magnum t-56 cryo treated and rem polished 6-gear removed (but is included)
-quicktime bellhousing for 302/351
-steeda tri ax handle for shifter
-crossmember for foxbody
-hurst shift knob with button built in
-clutch cable
-quadrant
-fork / throwout bearing
-ram twin disk clutch with 300 series disks flywheel is 28oz balance (straps broke on floater plate but never had an issue with it can be sent back to ram and rebuilt)
-strange 1350 yoke (rest of driveshaft not included)
these tansmissions alone new are $2800, i need to get $3200 for this complete kit
im located in area code 34695 shipping would be a bitch would rather not ...





How much for just the trans and the crossmember? No bell.
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
I'll take the bell then, it will give me an excuse to drive 1.5 hours back to your house (for it and the rad)
BTW you never answered my last PM
BTW you never answered my last PM
Last edited by blacksheep-1; Oct 2, 2011 at 12:59 PM.
sorry ive been debating on the radiator i dropped the motor in the new car and i may have to use the radiator again due to space constraints ill probably sell the radiator by itself and keep the fan and shroud and buy a new identical radiator to stick the fan and shroud on. does $20 sound reasonable for the radiator by itself ?
on to the transmission deal i dont mind parting this thing out but i need all the parts sold before i do so. if you guys want to work some deal that a couple of you can produce the money for the whole package, then sell whatever you guys dont need im game. I just dont want to start piecing it out and having a difficult time selling the odds and ends and/or have someone want the complete deal after i start parting it out... let me know if you guys would like to work something like that out
on to the transmission deal i dont mind parting this thing out but i need all the parts sold before i do so. if you guys want to work some deal that a couple of you can produce the money for the whole package, then sell whatever you guys dont need im game. I just dont want to start piecing it out and having a difficult time selling the odds and ends and/or have someone want the complete deal after i start parting it out... let me know if you guys would like to work something like that out
Yeah 20 bucks is good, I tell you this, I WILL buy the bellhousing so if you sell the trans I'm in. In fact I give my word that I will buy it and if I don't I will vote for that a-hole Obama for prez in 2012. That should do it!
I understand. I don't have time to broker a bunch of deals though. If you find an angle to sell the rest, shoot me a price on the trans alone.
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Thread
Thread Starter
Forum
Replies
Last Post



