Ford 2.3t parts
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Ford 2.3t parts
Selling the following parts for cheap. Prices are firm as i'm putting low dollar on them.
Solid lifter head, needs to be gone through. The real value is the solid lash adjusters. I don't know what cam is in it or what valves. SOLD
Upper to lower steel flange with steel 5.0 tb pattern upper to build your own intake $20
1 early square fuel rails for svo $5
1 square fuel rail for t/c $5
2.3 t-5 bellhousing cable style. powder matte black SOLD
Oil pan black -sold
T-3 turbo housing powder gloss black. Unsure which t-3 exactly -pending
Home ported lower square -$25 (unless dr dirt comes and gets it) Lowered to $15
Stock square upper with a hole for a AIT sensor black- $10 lowered to $5
2.3 NA harness. Not sure what it's from -$25
E-6 manifold -sold
2x 2.3 distributers -sold
1 svo axle-$35
stock upper square red-$10
stock lower-$15
Will add more later. Not sure how many 2.3t people need this stuff around here.
Solid lifter head, needs to be gone through. The real value is the solid lash adjusters. I don't know what cam is in it or what valves. SOLD
Upper to lower steel flange with steel 5.0 tb pattern upper to build your own intake $20
1 early square fuel rails for svo $5
1 square fuel rail for t/c $5
2.3 t-5 bellhousing cable style. powder matte black SOLD
Oil pan black -sold
T-3 turbo housing powder gloss black. Unsure which t-3 exactly -pending
Home ported lower square -$25 (unless dr dirt comes and gets it) Lowered to $15
Stock square upper with a hole for a AIT sensor black- $10 lowered to $5
2.3 NA harness. Not sure what it's from -$25
E-6 manifold -sold
2x 2.3 distributers -sold
1 svo axle-$35
stock upper square red-$10
stock lower-$15
Will add more later. Not sure how many 2.3t people need this stuff around here.
Last edited by plazma; 12-11-2011 at 11:30 AM.
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Team Geritol Racing
Join Date: May 2001
Posts: 5,759
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
When ever you want it man! I still have it sitting and waiting on a new home.
Escort Connoisseur
Join Date: Jun 2003
Posts: 2,574
Likes: 0
Received 0 Likes
on
0 Posts
Which side of the t-3 turbo housing is it? I could use one for the exhaust housing since I rebuilt it myself and nicked where the shaft seal goes. I haven't put it on a car yet so I dunno if it leaks. 
__________________
"Genuine" ASE certified Mazda, Hyundai, Isuzu Technician
Escort Enthusiast Site
Automotive Electrical Specialist, Tuning Specialist
"Genuine" ASE certified Mazda, Hyundai, Isuzu Technician
Escort Enthusiast Site
Automotive Electrical Specialist, Tuning Specialist
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Its the compressor housing. Don't know for sure but have a t-3 that needs a rebuild i'd sell for parts for 70.
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
FMUTPA
For Sale/WTB Ford, Lincoln, Mercury
0
12-07-2005 11:19 AM
