Wtb - set of aftermarket cams for a 01-04 sohc 4.6
Thread Starter
change cars like socks
Joined: Feb 2004
Posts: 6,977
Likes: 0
Wtb - set of aftermarket cams for a 01-04 sohc 4.6
looking to buy some aftermaket cams for my 01 gt with a nice lobe separation...i have a 03-04 cobra stock hood i can trade or i can buy em cash ...thanks
__________________
TR Ins Guru
Joined: Aug 2008
Posts: 1,863
Likes: 0
Isnt that contradicting? Cam(s) for a sohc motor. Good luck though Im looking for one also for my 5.0
__________________
Thread Starter
change cars like socks
Joined: Feb 2004
Posts: 6,977
Likes: 0
Registered User
Joined: Mar 2008
Posts: 3,486
Likes: 0
Be careful which cams you go with Eddie or be prepared to notch the pistons in order to make the cams work.
It doesnt matter what dish the pistons are either. The valves dont hit in the dish. 4.6 pistons (stock) all have a crown and that is where the notch needs to be in order to avoid PTV contact.
Usually anything below a Comp 270HR spec is safe. And depending how the 270 gets degre'd in can mean life or death.
Its not very difficult to notch the pistons if you dont have aftermarket pistons that are already set up.
I did the pistons in my 96 using a PI head and a couple modified valves as the template.
Hurst
It doesnt matter what dish the pistons are either. The valves dont hit in the dish. 4.6 pistons (stock) all have a crown and that is where the notch needs to be in order to avoid PTV contact.
Usually anything below a Comp 270HR spec is safe. And depending how the 270 gets degre'd in can mean life or death.
Its not very difficult to notch the pistons if you dont have aftermarket pistons that are already set up.
I did the pistons in my 96 using a PI head and a couple modified valves as the template.
Hurst
__________________
Originally Posted by Tiffiny
"We all heart the Hurst"
