Cobra Crank, flywheel, Cobra Upper intake, SPEC 2 Chutch
Thread Starter
finally painted the car!
Joined: Oct 2001
Posts: 2,177
Likes: 0
Cobra Crank, flywheel, Cobra Upper intake, SPEC 2 Chutch
Stock 4V Nodular flywheel. 90k miles. Has been resurfaced once 50k miles or so. $50
SPEC 2. 50k miles or so. Was with my T45 and never saw high rshared_pm clutch dumps and I put about 400rwtq down with it. Ran fine when pulled. Going a different route. $50
Stock 4V crank from a cobra (not mark
90k miles. Spun bearing on the #5 rod. Mains look ok. Needs to be turned. $200
Cobra intake. Has some port/polish work done. T/B bar has also been taken out for larger T/B. $150?
Located in North Tampa. Buyer pays shipping.
SPEC 2. 50k miles or so. Was with my T45 and never saw high rshared_pm clutch dumps and I put about 400rwtq down with it. Ran fine when pulled. Going a different route. $50
Stock 4V crank from a cobra (not mark
90k miles. Spun bearing on the #5 rod. Mains look ok. Needs to be turned. $200Cobra intake. Has some port/polish work done. T/B bar has also been taken out for larger T/B. $150?
Located in North Tampa. Buyer pays shipping.
__________________
-Ryan-
-Ryan-
Registered User
Joined: Mar 2009
Posts: 326
Likes: 0
still got the clutch?
__________________
SVT Cobra-Teksid.020(284ci)
Stock HCI/Forged Crank
Manley Pistons & H Beam Rods
Polished Vortech V-2,GodSpeed SpecV Intercooler
MPH Powerpipe,60's,Twin Aviator's,Kenne Bell BAP
Reichard 3.1,SCT BA-5000,ProCharger Pro-Flow BPV
Auto Meter Z-Series Gauges,Mac O/R H & 2.5 DuraBlack CB
Vogtland 1.6, MM CC Plates,Steeda Tri-Ax,Billetflow IRS Brace
Vortech Intercooler Fabrication Joe Bonczek/Custom Piping
SCT Tune Rob Wells@ Ford Speed Racing
SVT Cobra-Teksid.020(284ci)
Stock HCI/Forged Crank
Manley Pistons & H Beam Rods
Polished Vortech V-2,GodSpeed SpecV Intercooler
MPH Powerpipe,60's,Twin Aviator's,Kenne Bell BAP
Reichard 3.1,SCT BA-5000,ProCharger Pro-Flow BPV
Auto Meter Z-Series Gauges,Mac O/R H & 2.5 DuraBlack CB
Vogtland 1.6, MM CC Plates,Steeda Tri-Ax,Billetflow IRS Brace
Vortech Intercooler Fabrication Joe Bonczek/Custom Piping
SCT Tune Rob Wells@ Ford Speed Racing
