For Sale/WTB Ford, Lincoln, Mercury For Sale/WTB area for all Ford related items. Please keep this strictly ford related.

Testing waters NICE coupe for trade

Thread Tools
 
Old Mar 16, 2009 | 06:06 PM
  #1 (permalink)  
bottlefed93's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 1,163
Likes: 0
Default Testing waters NICE coupe for trade

Well guys, I need to start looking for more of a luxery car to do more traveling in (job related). If you now someone who would have something along those lines, please pas this info on. To start I probably have about 14,000 in this car. I had it appraised by a rep from Grundy custom car insurance for 12,000. Not even sure where to start. So I will start listing and will add as I remember. EVERYTHING on this car is new or rebuilt. When I say that, I mean EVERYTHING!! There are several people on the board that have seen this car and can vouch for it. Here is a start of the list

Rebuilt engine
Windsor jr aluminum heads (about 40 hrs port work,bronze guides, yada yada) I have paperwork
Edelbrock air gap intake
New Pro-systems carb ($700) bought less than 1 month ago
New water pump
New starter
Rebuilt alternator
New power steering pump
New power steering rack
New wheel bearings
New Afco ($400) aluminum radiator
Mark8 electric fan
DCC fan controller
New distributor
New coil
Rebuilt MSD 6al
New wires/plugs/cap/rotor (blah,blah)
Freshly rebuilt C-4
TCI pistol grip shifter
long tubes/off road h-pipe/New Flowmaster catback with tails
four lug welds with nice tires
Rebuilt rear with 373 gears
MM full length sub frame connectors
southside lowers
steeda double adjustable uppers
New brakes all the way around
Entire fuel system was purchased new a few months ago
16 gal fuel cell with sender
140 GPH pump
Aeromotive 13204 reg.
All AN pushlock fittings
Its a return fuel system
New black carpet
New black headliner
Black original GT seats
New rear seat delete
New custom steering wheel
EVERYTHING inside has been redone.
Full gauges (autometer tach/water temp/fuel gauge/oil pressure)
Factory black interior in excellent condition
4" Harwood bolt on hood
Aluminum driveshaft
NX nitrous system 100-250 shot (only been sprayed twice)
MSD timing retard for nitrous
NITROUS OUTLET Digital window switch for nitrous (with first gear lockout)
BRAND NEW mineral grey paintjob (looks unreal)
ICE COLD A/C
Hot heat
NEW mickey thompson drag radials
All wiring has been hidden. Car has been converted to 5-lug and now has WELD pro-stars with new mickey thompson front runners and new drag radials.
When the engine was built everything was replaced. Just about (literally) every nut/bolt on this car has been replaced. The trunk was welded in and the fuel cell and battery are in the trunk. I know I am forgetting a rediculous amount of stuff and I will add as I go. I have a stack of reciepts about 6-7 inches think and probably about 300++ hours in this thing. Also has ICE COLD A/C with new lines/compressor/evap/heater core/dryer (everything but the condensor). You really have to see this car to believe the condition and what has all been replaced. I know I am forgetting alot of stuff, but the car speaks for itself. With my new job I am required to do more traveling and I do not have the money to finance another car so I am looking to trade for a nice luxery car. Caddy/lexus/infiniti etc. Here are some pics before I put the prostars on. I will get updated ones in a day or so. Thanks













__________________
Every time I cross one thing off of my TO DO list,I add two more!!!

Last edited by bottlefed93; Mar 16, 2009 at 06:09 PM.
Reply
Old Mar 16, 2009 | 06:49 PM
  #2 (permalink)  
Joker Instituted's Avatar
wanna be ford guy.
 
Joined: Oct 2007
Posts: 1,452
Likes: 0
Default

that is sex right there. good luck and free bump for you.
__________________
its ok, the more parts that fall of the lighter i get.

.


Reply
Old Mar 16, 2009 | 07:24 PM
  #3 (permalink)  
bottlefed93's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 1,163
Likes: 0
Default

Forgot to add it has wild ride upper/lower torque box reinforcement kits. New engine mounts/balancer/shocks etc.
__________________
Every time I cross one thing off of my TO DO list,I add two more!!!
Reply
Old Mar 16, 2009 | 07:54 PM
  #4 (permalink)  
riverviewnative's Avatar
Registered User
 
Joined: Feb 2006
Posts: 4,210
Likes: 0
Default

Chris keep that damn thing. You will reget it if you don't.
Reply
Old Mar 16, 2009 | 09:14 PM
  #5 (permalink)  
Joker Instituted's Avatar
wanna be ford guy.
 
Joined: Oct 2007
Posts: 1,452
Likes: 0
Default

^ im with him on that one. that fox is way to clean and it would take anyone a good minute or two to get something built or restored as freash as that.
__________________
its ok, the more parts that fall of the lighter i get.

.


Reply
Old Mar 17, 2009 | 02:24 AM
  #6 (permalink)  
460 TZILLA's Avatar
THROTTLE STEER
 
Joined: Jul 2004
Posts: 929
Likes: 0
Default

Originally Posted by riverviewnative
Chris keep that damn thing. You will reget it if you don't.

I would keep that and just buy you a highway(mpg) car for commuting

you should be able to pick up one real cheap and decent shape IMO
__________________
Talk softly but Drive a big block
Reply
Old Mar 17, 2009 | 05:32 AM
  #7 (permalink)  
bottlefed93's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 1,163
Likes: 0
Default

Yes it took me over a year to finish it. My problem is MONEY!! or the lack thereof. I dont want to buy a junker for the last dollars I have and have it break down on me all the time. And I dont have the money to finance something (cant make payments). I have a couple of offers already. I am going to keep my eyes open to whats out there and offered and make my decision then. Thanks for the kind words guys!!
__________________
Every time I cross one thing off of my TO DO list,I add two more!!!
Reply
Old Mar 17, 2009 | 06:31 AM
  #8 (permalink)  
Vec's Avatar
Vec
Registered User
 
Joined: Jun 2007
Posts: 348
Likes: 0
Default



Originally Posted by Joker Instituted
that is sex right there. good luck and free bump for you.
__________________
Reply
Old Mar 17, 2009 | 07:49 AM
  #9 (permalink)  
slow poke's Avatar
Registered User
 
Joined: Oct 2004
Posts: 1,333
Likes: 0
Default



damn, sucks you have to get rid of it !!!!!! glws

bump for a gorgeous car !!!!!
__________________
just visiting this screwwey planet.
woohoo, 9.84 @ 137.7 mph on a 9" slick !!!!


Originally Posted by Gooser
just cause you have a cowl hood on your Honda doesn't mean you can hang out here.
Reply
Old Mar 17, 2009 | 01:05 PM
  #10 (permalink)  
riverviewnative's Avatar
Registered User
 
Joined: Feb 2006
Posts: 4,210
Likes: 0
Default

Keep it Keep it Keep it. I will try to find you a car cheap at teh auction. So then you can KEEP IT
Reply



All times are GMT -8. The time now is 05:19 AM.