289 clevor forsale
HardCore
Thread Starter
Join Date: Aug 2004
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
289 clevor forsale
i put together a clevor for a car that i am getting rid of. so now this can go too.
its got cleveland 2 brrl heads on a 289 block
the valves are 2.04 I and 1.65 ex.
.485\.510 CAM (with 1.73 ratio rockers) 262\272 dur. hyd cam
modified aluminum edelbrock dual plane intake
holley double pumper
long tube headers
8.5- 9 compression
msd 6al box and mallory dualpoint dist go with it.
$1200 obo call Ryan at 352 428 4704
its got cleveland 2 brrl heads on a 289 block
the valves are 2.04 I and 1.65 ex.
.485\.510 CAM (with 1.73 ratio rockers) 262\272 dur. hyd cam
modified aluminum edelbrock dual plane intake
holley double pumper
long tube headers
8.5- 9 compression
msd 6al box and mallory dualpoint dist go with it.
$1200 obo call Ryan at 352 428 4704
HardCore
Thread Starter
Join Date: Aug 2004
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
ttt also will incluse the original 289 heads if you would rather have a regular 289, all you woul dneed would be a set of pushrods, head gaskets, and intake
but the clevor will definetly make more power.
its a sweet little street engine, somthing different-you dont see every day.
i had an engine similar, with the same heads and close cam and it ran 13.5 with an automatic and drag radials.
so with a 5 speed, and 4.10 gears mid-low 13's should be no problem
but the clevor will definetly make more power.
its a sweet little street engine, somthing different-you dont see every day.
i had an engine similar, with the same heads and close cam and it ran 13.5 with an automatic and drag radials.
so with a 5 speed, and 4.10 gears mid-low 13's should be no problem
