I am selling my Twisted Wedge Heads, only because I am going with a set of R Heads. These heads are the tits. They flow over 305 cfm at .600 lift, they have been ported and flow tested and I have all the paperwork on the flow numbers. They have CompCam Beehive valve springs on them, titanium retainers and keepers, and locks. Will also include a set of SHAFT MOUNTED Omega 1.6 roller rockers that cost me almost 850.00 alone. 2.02 intake 1.6 exhaust. These are beautiful heads, Port work and flow cost me 600.00 springs cost 300.00 and the cost of the heads at 1050.00. Thats well over 2800.00. I am asking 1800.00 for the heads and the valvetrain. Also available is a Spyder intake that is port matched to the heads which has been cleaned up and ported to a 1262 fel pro, Intake with elbow, the 42# Fuel Injectors that are match flowed and 75mm Race Accufab Throttle body. 1200.00 for the intake.

This is a serious top end kit, I do recommend using this setup on a forced induction vehicle though.

I will post pics later tommorow.

 

who done the port work on these? CNC'ed or hand ported? Thanks

 

Hand Ported only by Neil Erickson, goes by MaxFlow and is highly reputable on sites such as Corral, Modular Mustangs, Stangnet and Mustang Central.

 

Nice set up,man one day I'll see my heads and intake,I've been waiting 8 months.Anyway,sorry for the hijack bro,good luck on the sale.

 

Thanks Brian, I know what you mean, it took me about 5 months to get my haeds and intake back after I sent them out.

 

Tip Top...

 

pm'ed