6.7 and 6.75 Hardened Pushrods

Reply Subscribe

Thread Tools

Aug 10, 2006 | 02:13 PM

#1 (permalink)

BadA$$'88Coupe

Thread Starter

Registered User

Joined: Jan 2005

Posts: 101

Likes: 0

6.7 and 6.75 Hardened Pushrods

I have two sets of hardened pushrods for sale. They are very slightly used, and are all in perfect condition. I was going to used these for my trickflow heads, but as it turns out these were the wrong lengths for my setup.

C.H.M - 6.7

Trick Flow - 6.75

$50 for each set. Sets are of 16 pushrods.

Prices are +SHIPPING

Wsballa69@aol.com

__________________
'88 Notch - 306, Ported Twisted Wedges, Ported Offy Port-O-Sonic, TFS Stage 1 Cam, 1.7 Rockers, Holley 600, BBK Longtubes, Dumped 2 Chambers, 3.73's....

Aug 12, 2006 | 11:16 AM

#2 (permalink)

BadA$$'88Coupe

Thread Starter

Registered User

Joined: Jan 2005

Posts: 101

Likes: 0

ttt

__________________
'88 Notch - 306, Ported Twisted Wedges, Ported Offy Port-O-Sonic, TFS Stage 1 Cam, 1.7 Rockers, Holley 600, BBK Longtubes, Dumped 2 Chambers, 3.73's....

Aug 12, 2006 | 02:27 PM

#3 (permalink)

DrDirt

Team Geritol Racing

Joined: May 2001

Posts: 5,759

Likes: 0

What size did you need? I have some Trick Flow 6.55 push rods.

__________________
YO! Barry! You LOST!

Aug 12, 2006 | 11:29 PM

#4 (permalink)

BadA$$'88Coupe

Thread Starter

Registered User

Joined: Jan 2005

Posts: 101

Likes: 0

I could use a set of hardened 6.27's. That is stock length for a 5.0

__________________
'88 Notch - 306, Ported Twisted Wedges, Ported Offy Port-O-Sonic, TFS Stage 1 Cam, 1.7 Rockers, Holley 600, BBK Longtubes, Dumped 2 Chambers, 3.73's....