8 inch / 6 rib renegade crank pulley
Donut Killer
Thread Starter
Join Date: Jun 2002
Posts: 2,747
Likes: 0
Received 0 Likes
on
0 Posts
8 inch / 6 rib renegade crank pulley
I have a ASP (I think) 8" crank pullie I got with a Paxton, Novi 1000, I used to have. It is a 6 rib and is supposed to bolt right up. I believe with it and the power pipe, it was supposed to give around 12-14lbs of boost.
Here are two pictures with a stock pulley sitting inside of the other one.
https://www.tamparacing.com/forums/a...dsc00001-m.jpg
https://www.tamparacing.com/forums/a...dsc00002-m.jpg
$100.00
Here are two pictures with a stock pulley sitting inside of the other one.
https://www.tamparacing.com/forums/a...dsc00001-m.jpg
https://www.tamparacing.com/forums/a...dsc00002-m.jpg
$100.00
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
Don't be so angry
Join Date: Mar 2004
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
hey Brett, is this for the silver powder-coated pulley?
John
John
__________________
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
John
1992 Mustang LX 5.0-Powerdyne BD-11A, 3.73's, FRPP clutch, chrome Ponies, Mac headers, Aeromotive regulator, MSD 6A, MSD BTM, FRPP 42# injectors, Pro-Flow Air Optimizer, Trick Flow Track Heat intake, Edelbrock 75MM TB, AFM Power Pipe
