89 coupe original v8 5spd
Thread Starter
Registered User
Joined: Sep 2005
Posts: 405
Likes: 0
89 coupe original v8 5spd
http://s13.photobucket.com/albums/a257/cobra305hp/
interior pic is before upgraded seats
back up for sale price is $5000new price need this gone any reasonable offers
Nitrous kit and msd digital window switch still brand new in box never installed also a autometer tach and shift ligh brand new.
Afr 165cc 58cc heads 7/16 stud mounted p/n 1399 nonemissions
edelbrock rpm2 intake
custom camshaft from Jay allen at camshaft inovations.
fms 30lbs injector and pro m meter
70 mm bbk t/b
ford racing tall polished aluminum valve covers
griffin radator
electric fan
msd 6al
aluminum driveshaft
new t5 transmission
upr u/l control arms
lakewood struts and shocks
moroso front trick springs with no coils cut rear needs upgraded springs
no a/c no heat have everything new to put air back on the car new comp dryer and lines.
car has a refreashed stock short block with 1200 miles on it and mods.
qa1 tubular k member
spec stage 2 clutch and spec aluminum flywheel
complete black leather seats out of a 96 cobra
rear mounted battery
welded rear end, subframe connectors
auburn 31 spline diff 3.73 gears and moser 31 spline axles
b and m short shifter
msd pro billet distributor
ford racings 9mm wires
scorpion 1.6 roller rockers and arp 7/16 studs
arp head studs
arp lower intake bolts
weld drag lites mickey thompson drag radials
and other stuff i probley forgot
Ive been to the track once car ran a 13.0 with a 2.45 60 ft i cannot drive
car may have a bad head gasket as driving the car hard with no timing light.
interior pic is before upgraded seats
back up for sale price is $5000new price need this gone any reasonable offers
Nitrous kit and msd digital window switch still brand new in box never installed also a autometer tach and shift ligh brand new.
Afr 165cc 58cc heads 7/16 stud mounted p/n 1399 nonemissions
edelbrock rpm2 intake
custom camshaft from Jay allen at camshaft inovations.
fms 30lbs injector and pro m meter
70 mm bbk t/b
ford racing tall polished aluminum valve covers
griffin radator
electric fan
msd 6al
aluminum driveshaft
new t5 transmission
upr u/l control arms
lakewood struts and shocks
moroso front trick springs with no coils cut rear needs upgraded springs
no a/c no heat have everything new to put air back on the car new comp dryer and lines.
car has a refreashed stock short block with 1200 miles on it and mods.
qa1 tubular k member
spec stage 2 clutch and spec aluminum flywheel
complete black leather seats out of a 96 cobra
rear mounted battery
welded rear end, subframe connectors
auburn 31 spline diff 3.73 gears and moser 31 spline axles
b and m short shifter
msd pro billet distributor
ford racings 9mm wires
scorpion 1.6 roller rockers and arp 7/16 studs
arp head studs
arp lower intake bolts
weld drag lites mickey thompson drag radials
and other stuff i probley forgot
Ive been to the track once car ran a 13.0 with a 2.45 60 ft i cannot drive
car may have a bad head gasket as driving the car hard with no timing light.
Last edited by 97305hpcobra; Jun 27, 2006 at 03:35 PM.
Thread Starter
Registered User
Joined: Sep 2005
Posts: 405
Likes: 0
ya its under the dash still u need everything in the engine bay. Also the car has bbk 1 3/4 long tube headers off road h pipe and energy suspension mounts.
Last edited by 97305hpcobra; Jun 9, 2006 at 12:48 PM.
I gota Cheby
Joined: Jul 2003
Posts: 2,694
Likes: 0
well heck where are you located, I have an 95 Impy SS might be interested in a swap. Going on Vaca, till Thursday when I get back maybe we can meet somewhere in mid if your far and i'll take some pics of the car. thanks Andel
__________________
Only 1/4 mile track I know is Gandy Bridge
Only 1/4 mile track I know is Gandy Bridge
