Misc Stuff- New Clutch, Bellhousing, Standalone ECU, SX FUel Pump, regulators, More
Guest
Posts: n/a
Misc Stuff- New Clutch, Bellhousing, Standalone ECU, SX FUel Pump, regulators, More
Here goes...
SX 18203 fuel pump. This is the pump Aeromotive COPIED when they made the A1000. This is a used pump but was rebuilt by SX during and upgrade procedure about 3 years ago and has been sitting on the shelf ever since. I am an SX dealer and use all new stuff on projects, so I dont need this used one. $175obo
Cartech remote mount fuel pressure regulator. Never had a drop of fuel through it. AN-10 inlets, AN-6 outlets. Brand new, but tarnished from the weather. Being an SX dealer I cant have Cartech stuff on the car
$60
On Ebay too, ends Monday 4/3
Bell Engineering model 207 Super FMU. Also brand new, never used, but tarnished from the elements. Im not real knowledgable on FMUs but its and adjustable rising rate. Has some kind of bleeder on the top to adjust it. The previous owner paid like 350$ for it. $125obo- On Ebay, ends Monday
Stock Vortech FMU- Not sure of the ratio, but its the black one that comes with the V1 blowers. $70obo.
Stock K member, A-Arms and Springs from an 89 GT. Not sure what you would want it for, maybe to sell a car and you dont want to let your tubular setup go.. $30 for all of it. No shippin...Still on the car, will get it off the weekend of...Not sure..Work keeps gettin in the way... But let me know you want it, since I will probably look at it for about 3 days and haul it off.
SOLD LIST:
Haltech E6S-8 standalone ECU. -Sold 'local'..
Brand new clutch- SOLD
Stock T5 V8 bellhousing.SOLD
SX 18203 fuel pump. This is the pump Aeromotive COPIED when they made the A1000. This is a used pump but was rebuilt by SX during and upgrade procedure about 3 years ago and has been sitting on the shelf ever since. I am an SX dealer and use all new stuff on projects, so I dont need this used one. $175obo
Cartech remote mount fuel pressure regulator. Never had a drop of fuel through it. AN-10 inlets, AN-6 outlets. Brand new, but tarnished from the weather. Being an SX dealer I cant have Cartech stuff on the car
$60On Ebay too, ends Monday 4/3
Bell Engineering model 207 Super FMU. Also brand new, never used, but tarnished from the elements. Im not real knowledgable on FMUs but its and adjustable rising rate. Has some kind of bleeder on the top to adjust it. The previous owner paid like 350$ for it. $125obo- On Ebay, ends Monday
Stock Vortech FMU- Not sure of the ratio, but its the black one that comes with the V1 blowers. $70obo.
Stock K member, A-Arms and Springs from an 89 GT. Not sure what you would want it for, maybe to sell a car and you dont want to let your tubular setup go.. $30 for all of it. No shippin...Still on the car, will get it off the weekend of...Not sure..Work keeps gettin in the way... But let me know you want it, since I will probably look at it for about 3 days and haul it off.
SOLD LIST:
Haltech E6S-8 standalone ECU. -Sold 'local'..
Brand new clutch- SOLD
Stock T5 V8 bellhousing.SOLD
Last edited by boostedOne; 04-02-2006 at 12:46 PM.
Donut Killer
Join Date: Jun 2002
Posts: 2,747
Likes: 0
Received 0 Likes
on
0 Posts
Does the stock clutch for T-5 have the throw out bearing included? Plastic one or a metal one?
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
Guest
Posts: n/a
Bell housing is a Fox bellhousing. Off the 89, although I didnt know they changed them.
The clutch has a TO bearing I THINK. It did, and I think I saved it. As for being plastic or steel, where would it be plastic? The surface that rides the clutch is steel, as is the shell that attaches to the fork.
And yeah, the cartech regulator is for EFI.
The clutch has a TO bearing I THINK. It did, and I think I saved it. As for being plastic or steel, where would it be plastic? The surface that rides the clutch is steel, as is the shell that attaches to the fork.
And yeah, the cartech regulator is for EFI.
Donut Killer
Join Date: Jun 2002
Posts: 2,747
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boostedOne
The clutch has a TO bearing I THINK. It did, and I think I saved it. As for being plastic or steel, where would it be plastic? The surface that rides the clutch is steel, as is the shell that attaches to the fork.
Let me know if you have the TO bearing with it, as the current one has to be replaced.
Please send pictures to montgomerybrothers @ yahoo.com
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
Guest
Posts: n/a
Originally Posted by OldMan
Been hearing about them being plastic lately.....
Let me know if you have the TO bearing with it, as the current one has to be replaced.
Please send pictures to montgomerybrothers @ yahoo.com
Let me know if you have the TO bearing with it, as the current one has to be replaced.
Please send pictures to montgomerybrothers @ yahoo.com
Donut Killer
Join Date: Jun 2002
Posts: 2,747
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boostedOne
I dont got any pics of the clutch, sorry. But its clean and not rusty.
Do you have the TO bearing to go with it?
__________________
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
SC Motorsports
11801 State Road 52
Hudson, FL 34669-3092
(727) 856-8768
FordSpeed Racing
11733 66th St., Unit 123
Largo, FL 33773
(727) 549-8255
Dynojet Chassis Dyno
Guest
Posts: n/a
I am 95% sure I still have the throw out bearing that was with it.
Im down in Bartow working right now. I should be back at the end of next week. If you want I can let you know for sure if I have the TO bearing. or if someone wants something of higher value I will drive up to the house and check before then.
As to its condition, I'll make a deal with ya. If it aint clean, unused and you dont want it, I'll give ya 20 bux for the gas you wasted. if it was shitty I would have tossed it in the trash.
Im down in Bartow working right now. I should be back at the end of next week. If you want I can let you know for sure if I have the TO bearing. or if someone wants something of higher value I will drive up to the house and check before then.
As to its condition, I'll make a deal with ya. If it aint clean, unused and you dont want it, I'll give ya 20 bux for the gas you wasted. if it was shitty I would have tossed it in the trash.
