Looking for Heads
Thread Starter
Registered User
Joined: Oct 2005
Posts: 202
Likes: 0
Looking for Heads
Looking for used 5 liter heads to freshen up an HO with 175k.Prefer GT40 or E7TE mildly ported, I would like ready to bolt on if possible.Thanks, Scott.Also, I have an E7TE truck block that I'm wondering if I can use for a spare motor.Anyone know if this motor has hypereutectic pistons or cast from the factory(1989 van).Can I use a stock mustang cam and roller setup with this engine?I am planning on turning the crank and honing/rings.Any replies appreciated.
change cars like socks
Joined: Feb 2004
Posts: 6,977
Likes: 0
i might have the heads out of my 97 mountaineer 5.0 gt40p motor cause i spun a rod bering and they are changing out the whole motor....so ill have the heads like in a week ill sell them for 400 bucks
__________________
has his prioritys ef'd up
Joined: Mar 2004
Posts: 2,450
Likes: 0
I have a set of stock E7's frsh from the machine shop, 0 miles. No cracks, square, all new seals, and they even replaced 4 valve's but they look brand new. 250.00
__________________
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Thread Starter
Registered User
Joined: Oct 2005
Posts: 202
Likes: 0
heads
First of all, thanks for the replies guys.My first wish is to get a set of GT-40's, not P's,cause I dont want to have spark plug interference issues, but I am also getting impatient.How worth is it porting E7TE's? Ive done motorcycle heads in the past so not an issue,i know the basics. I dont want hundreds of HP obviously, and I would also not want to lose low end driveability for a daily driver.
Ghillied up and ready.
Joined: Dec 2004
Posts: 1,287
Likes: 0
I have GT-40's with new Trick Flow Springs(200 for the springs alone) and they have never been cut or altered in any way. PM me for price.
__________________
" When you men get home and face an anti-war protester, look him in the eye and shake his hand.
Then, wink at his girlfriend because she knows she's dating a pussy." General Tommy Franks
"Congressmen who willfuly take actions during wartime that damage morale and undermine the military are saboteurs and should be arrested, exiled or hanged".
President Abraham Lincoln
" When you men get home and face an anti-war protester, look him in the eye and shake his hand.
Then, wink at his girlfriend because she knows she's dating a pussy." General Tommy Franks
"Congressmen who willfuly take actions during wartime that damage morale and undermine the military are saboteurs and should be arrested, exiled or hanged".
President Abraham Lincoln
HardCore
Joined: Aug 2004
Posts: 446
Likes: 0
i have a pair of fully ported EZTE heads fully assembled, stock valves, cleaned and re-seated, new seals, springs with about 20k miles on them.
intake ports are slightly enlarged and beveled lips for better port match, slightly enlarged runners intake and exhaust
valve supports tapered
castings taken out
exhausts slightly enlarged and fully squared
heads have 20 hours of port work done
comes with intake gaskets, exhaust gaskets, valve cover gaskets and felpro head gaskets (one head gasket has slight blemish but could be fixed with a little silicone, should work without a problem)
$250 OBO
intake ports are slightly enlarged and beveled lips for better port match, slightly enlarged runners intake and exhaust
valve supports tapered
castings taken out
exhausts slightly enlarged and fully squared
heads have 20 hours of port work done
comes with intake gaskets, exhaust gaskets, valve cover gaskets and felpro head gaskets (one head gasket has slight blemish but could be fixed with a little silicone, should work without a problem)
$250 OBO
