EF-C

Hello TR

I just bought a 1990 Honda Civic Std and wanted to make it a little better looking
I decided to put lips and skirts
After searching for a while I found that EK side skirts are the most common for EF's but I did not like the way it looks. I could not find side skirts that I like. I went to the junk yard and found this

1990-93 Honda Accord rear mud flaps
1990-93 Toyota Celica GT side skirts
1988-92 Mazda MX6 front lip (using as a rear lip)

Everything went on very easy.
For the side skirts, it was just taking it off from the Celica and screw them in the Civic (no cutting at all)

Rear mud flaps was just a little trimming inside where the wheel well goes and screw them in with self tapping screws.

The lip was just cutting the excess with a very sharp knife (for a clean cut) and screwing it in.

Here are the pictures
Let me know what you think
Before you guys say anything, I know I need a front lip; I am currently looking for a Volvo front lip.

Paulino

Awesome write up!

LATINO HONDA

cool bro can't wait to see the front lip

EF-C

Well, I went to the junk yard and did not found any Volvo lip or MK3 lip so I decided to find a lip from something else. After searching and comparing for quite a bit I found a lip that I thought I could make it work. Here is what I found:

1990-97 Lincoln Town Car (front lip)

This one did not went as easy as the side-skirts or the rear lip but I manage to get it to fit. I had to cut it in half and trim the ends in order to get it to the proper size. I also had to trim the flat part where the lip attach to the bumper because it was too thick.

Here are the pictures, let me know what you guys think.

LATINO HONDA

Not bad for saving some money you hit it on point.

EF-C

Thanks, I just hope this will help some people out there who are looking for a different option when it comes to EF's.