GROUND UP EF hatch build.
Haven't done anything but put the breather fittings on.
I did adjust the idle though and drive it up and down my street.
I did adjust the idle though and drive it up and down my street.
Thanks. With all this taking the car back and forth, I'm getting pro and backing up a trailer. Then again, your yard was a tough one! Haha.
TPS sensor wasn't reading correctly and neither was my map sensor. Also had to redo my injector setup, as the fuel wouldn't atomize correctly.
Should be done tomorrow though. Fingers crossed for big numbers.
TPS sensor wasn't reading correctly and neither was my map sensor. Also had to redo my injector setup, as the fuel wouldn't atomize correctly.
Should be done tomorrow though. Fingers crossed for big numbers.
The injectors needed the spacers flipped around to the other side. I've been busy with school and other shit so the car has kind of gone on the back burner. In a good sense though, I should be selling the LS tranny in the car currently and finally have my gsr rebuilt.
The injectors needed the spacers flipped around to the other side. I've been busy with school and other shit so the car has kind of gone on the back burner. In a good sense though, I should be selling the LS tranny in the car currently and finally have my gsr rebuilt.
Im excited...
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.




