Let me know what you guys think. I will keep updating pics.
Crx build with pic's





Ill start with prepairing the engine bay so when the swap arrives we can just drop it in.











As you can see it is nasty so we better get it cleaned up and ready for paint.



I got all th rubber plug's pulled out. I swear their is about 1000 of them they are lurking in every corner.

If you ook close you can see where someone hacked off the mount on the crossmember. Ill drill the spot welds and remove the rest of the mount.





Pulled the fenders off so I wont have any tape lines or any primer showing if you look under the lip of the fender.



Yeah we wont be useing this little master.

We are upgrading to a 1" bore. May not seem like much of a differance but, trust me it is.

1" bore master off of a 98 spec jdm type r



jdm yo


Swap just came in...














Let not forget the cluster... Possibly putting this 98 spec jdm type r cluster in 8.5 DAMN














UPDATE 7/31/09
Full gsr brake set up.

Isnt that sexy? Front wheel stand's in the near future.


Finishing up the edges where I welded the holes where the front mount was and then we decided that we would get the full race traction bars that take the place of the cross member. They will serve 2 purposes. 1 They will obviously help with traction and wheel hop 2 It will look alot cleaner....


8/1/09 UPDATE
Im in the process of making the seams a little smoother. Im not removing them all together just making them look more profesional



UPDATE 8/3/09Now do they look better?






UPDATE 8/4/09 @ 5:05am
Base coat

Who the hell?



1st coat of clear

Done deal


UPDATE 8/20/09
New parts came in

]











UPDATE 8/22/09
More parts came in again

















=======
Car has been gone about 5 days, this is the progress so far. There was a ton of rust all around the car, so thats all being taken care of first.









Waiting for a warm day to paint, Carbon fiber sunroof just came in and new bumper from honda will be here in the morning!



Crx si Carbon fiber sun roof

Hondata s200 with all options

The weave


Just picked up this stuff from Honda it was here in one day, I also got the stanley light cover dave thanks to lkq.





Just ordered these today (1/15/09), D2 Racing Full Coilovers SuburbanNoize has these on his 98 Integra and they are really nice. So when we get the car back from paint they can be installed!







Now for the paint. These are cell pics. We will have better pic's soon.

 

looks good keep us updated.. and what platform is going into that chassis?

 

update

 

nicce

 

thx..

 

any in put?

 

Should move out pretty well when it's done.

 

Looks good Terry. Can't wait to tune it

 

Thank you and it shouldnt be to much longer from not and the motor will be in it.

 

very nice/