Turbo Position
Baby Rhino
Thread Starter
Join Date: Mar 2003
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Position
Ok on the mani that i am getting my turbo sits right in front so the oil feed and drain are sitting Horizontal. Now my question is which bolts do i loosen so i can turn it to make the feed and drain Vertical. I am guessing that its the bolts that are in the center of the turbo by the oil feed and drain. let me know thanks.
yah....just unclamp that belt looking deal, take apart the two housings...there should be a little metal dowel pin thing, take that out with a pari of pliers and then reattach the assembly.
Guest
Posts: n/a
Originally posted by 2TurboImports
yah....just unclamp that belt looking deal, take apart the two housings...there should be a little metal dowel pin thing, take that out with a pari of pliers and then reattach the assembly.
yah....just unclamp that belt looking deal, take apart the two housings...there should be a little metal dowel pin thing, take that out with a pari of pliers and then reattach the assembly.
ahh...all the one's i've worked with are from subarus...it has this belt that goes around it and clamps down, then you put a bolt through the clamp...hard to explain
The G-14 Classified
Join Date: Sep 2002
Posts: 5,265
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Cronic
A belt??
Erm... do you mean the metal clamp? Or is this actually a rubber belt??
A belt??
Erm... do you mean the metal clamp? Or is this actually a rubber belt??
__________________
Boost...it's a hell-of-a drug
Boost...it's a hell-of-a drug
