i am looking to run like 15-20 lbs of boost on a gsr motor(b18c1) what has to be done to the motor to run that many lbs. of boost?????

 

What turbocharger are you looking to use?

 

turbonetics t3-t4

 

Why a Turbonetics turbocharger? I know people who have had no problems with them and I know people who have had major problems with them. I would use a Garrett or Precision. 15lbs-20lbs would be quite a bit of power. I would replace the pistons with 9.8:1 forged pistons, Eagle/Pauter/Crower rods (prefer Pauter) and new rings/pins. Have you thought about your fuel and engine management?

 

for 20lbs i'd sleeve that bitch

 

It would take allot of stress off him/her but I have have seen people make allot of power with stock B18c1 sleeves. I would and did resleeve my B16a block.

 

ttt

 

so whats the best kind of turbo to use and what size??

 

15-20 psi....definitely gonna need bottom end work, and dont bother with turblownetics, get an airresearch garrett or somethin..gonna need pistons and rods, fuel management, fuel pump and injectors for more fuel, still need to consider the manifold, intercooler, piping, blow off valve, so on so forth...best kind of turbo...your not really saying how much power you want to make, soooo.......

 

i have a hks ss blow off valve and a turbonetics deltagate 2,, also a fmu, and a missing link and all the piping.....i need the manifold and the turbo and intercooler.....if anyone knows where i can get this stuff at let me know ASAP..........