10.5 cr turbo setup
10.5 cr turbo setup
I was wondering I have the setup I mentioned before, w/ 10.5.1 cr forged pistons, and eagle rods. What kind of turbo setup should I be looking for I already talk to John about the Hondata but turbo wise is it cheaper to by a complete kit or seperate parts.
And what do I need, turbo,Ic,mani,piping,wg,bov,injectors or fmu if so what kind or size,and turbo timer any ideal will be welcome.Also I want to keep my A/C and powersteering.
thanks,
joe
And what do I need, turbo,Ic,mani,piping,wg,bov,injectors or fmu if so what kind or size,and turbo timer any ideal will be welcome.Also I want to keep my A/C and powersteering.
thanks,
joe
Last edited by JOE P.R.C; 03-29-2003 at 04:18 AM.
If you look around for all of your parts it's usually cheaper and you are satisfied with all of your parts in the kit. You will need ...
* Turbocharger
* Wastegate
* Blowoff valve
* Intercooler
* Intercooler pipes
* Oil feed and return lines
* Exhaust manifold
* Misc flanges
Hondata is the key to your setup with that compression.
* Turbocharger
* Wastegate
* Blowoff valve
* Intercooler
* Intercooler pipes
* Oil feed and return lines
* Exhaust manifold
* Misc flanges
Hondata is the key to your setup with that compression.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead