I was wondering if instead of putting a t fitting off the stock oil pressure sensor if I could just tap off the oil filter adapter that I am using for the aftermarket oil temp and pressure? I'm thinking it's the same but want to make sure.

It's a autotecnic oil filter adapter that has four 1/8 npt threaded holes. 2 holes have the sensors for the above mentioned gauges and 2 have threaded plugs. instead of having a male/male npt to go from the block to t fitting, then t fitting, then male to male npt/an adapter to hook the oil line to. I figured less places to leak if I can just thread the male/male npt to an adapter straight into the oil filter adapter. thanks for the confirmation.

 

come on some has to be able to confirm this for me. ttt

 

thank you, I just wanted to ask instead of assume and have the turbo crap out, it'd be just my luck that for some reason the adapter wouldn't be good enough. thanks for the confirmation.