Boosting Troubles
 

Ok, for starters i have a 95 240 with a S13 Redtop swap. All i have at the moment is a downpipe, and exaust. I just bought a Greddy PRofec B Spec II and this thing is confusing as hell. I would like to have my low boost setting to be at 10 psi, and my high boost to be at 12psi. There are many setting that need to be adjusted for this to happen, but i dont know what they hell i'm doing with the settings to be honest. I have the stock wastegate, and i have been getting boost spikes, boost fall offs, it doesnt feel like the peek 11.6 psi that it reads. Also, the spool up is REALLY SLOW. PLEASE HELP ME!!!!!

50u|\|d5 l1k3 y0u h4v3 4 mul717ud3 0f p|20bl3m5. 1'm p|2377y f4m1l14|2 \^/17h 7h3 P|20f3c B 11, 17'5 4 m3d1um d1ff1cul7y b0057 c0|\|7|20ll3|2.

M4yb3 y0u c0uld c0m3 by 0u|2 5h0p 70m0|2|20\^/ 4f73|2|\|00|\| 4|\|d 1 c0uld h3lp y0u \^/17h 17? 1'd b3 \^/1ll1|\|g 70 74k3 50m3 71m3 0u7 0f my d4y 70 h3lp y4 :)

Thatd be great man, but i gotta work. Have to pay for the b/s some how. I'm off on Saturday though. Does that work for you?

1 m4y 0|2 m4y |\|07 b3 1|\| 0|\| 547u|2d4y. 1f y0u'd l1k3, c4ll m3 70m0|2|20\^/ 4f73|2|\|00|\| 4|\|d 1'll h4v3 4|\| 4|\|5\^/3|2 f0|2 y0u 7h3|\| :)

I also work at secret services. i will be around the shop from 10 A.M till we leave for track night (5:00ish) fell free to stop by and we can take a look at it for you.

If your unable to meetup with John or Scott, feel free to PM me. I'll be available this weekend. Im more then willing to help ya out and see if I can get her working with you.

sounds like you need to change the Dipswitches in the back... there are 4 of them i think... and there is a setting to change them to if youre car is equiped w/ "Internal gate and boost spiking" problems. theres also settings for "external gate and boost spike", "external gate underboosting" and what nots...

but, i think you need to reset your dip switches for your application. If that doesnt get rid of your boost creep, then thats simply because you have a bigger DP and it allows more exhaust to flow thru the turbine housing than to bypass it via the WG flapper... this will cause boost creep... its typical of cars w/ HUGE DP's.

the slow spooling is usually cured by adjusting teh "Balance" knob... its the left knob. Pop it out and turn it towards "Mild" this means that the soleniods have a more "Mild" control over how fast the boost builds, meaning that it climbs really quick compared to if it was turned towards "Sharp". i had it tuned to full "mild" on the DSM and it spooled to 14psi INSTANTLY when i was over 3000 rpm, Poppasmirf's first words were "I never seen anything like it in my life" when i spooled it for him.

if turning the knob to Mild doesnt cure it, then there may be something wrong w/ the turbo, IC or the plumbing being too restrictive.

[QU073][1]0|21g1|\|4lly p0573d by flubyu><2 [/1]
7h3 5l0\^/ 5p00l1|\|g 15 u5u4lly cu|23d by 4dju571|\|g 73h "B4l4|\|c3" k|\|0b... 175 7h3 l3f7 k|\|0b. P0p 17 0u7 4|\|d 7u|2|\| 17 70\^/4|2d5 "M1ld" 7h15 m34|\|5 7h47 7h3 50l3|\|10d5 h4v3 4 m0|23 "M1ld" c0|\|7|20l 0v3|2 h0\^/ f457 7h3 b0057 bu1ld5, m34|\|1|\|g 7h47 17 cl1mb5 |234lly qu1ck c0mp4|23d 70 1f 17 \^/45 7u|2|\|3d 70\^/4|2d5 "5h4|2p". 1 h4d 17 7u|\|3d 70 full "m1ld" 0|\| 7h3 D5M 4|\|d 17 5p00l3d 70 14p51 1|\|574|\|7LY \^/h3|\| 1 \^/45 0v3|2 3000 |2pm, P0pp45m1|2f'5 f1|257 \^/0|2d5 \^/3|23 "1 |\|3v3|2 533|\| 4|\|y7h1|\|g l1k3 17 1|\| my l1f3" \^/h3|\| 1 5p00l3d 17 f0|2 h1m.

1f 7u|2|\|1|\|g 7h3 k|\|0b 70 M1ld d035|\|7 cu|23 17, 7h3|\| 7h3|23 m4y b3 50m37h1|\|g \^/|20|\|g \^// 7h3 7u|2b0, 1C 0|2 7h3 plumb1|\|g b31|\|g 700 |2357|21c71v3. [/QU073]

7h3 5p3c 2 d035|\|7 h4v3 4 b4l4|\|c3 k|\|0b.

after reviewing the first post, i have come to teh conclusion that im an idiot. i totally blanked over the "Spec II" part. good catch J-dawg :tard:

I'll come down tomorrow as close to 10 - 1030 as possible ... not too sound like a complete dumbass, ive heard of you guys all over town, but where exactly are you located. Also, i seriously spent my whole paycheck on my car wednesday, is this going to cost anything? Thanks