Any ElantraXD owners?
Any ElantraXD owners?
The thirst mutilator
Joined: Sep 2002
Posts: 6,810
Likes: 0
Were you planning on suping up this elantra of yours?
__________________
"If I could write off your murder
I'd save all of my receipts
because I'd rather you be dead
than lose a tiny shred of what I made this fiscal year"
-Nathan Explosion (Brendon Small)
"If I could write off your murder
I'd save all of my receipts
because I'd rather you be dead
than lose a tiny shred of what I made this fiscal year"
-Nathan Explosion (Brendon Small)
Registered User
Joined: Aug 2002
Posts: 0
Likes: 0
I hate to break it to you but there is alot of aftermarket for your car. Your car has the beta engine, same as the first 2 generation tiburons and the i4 2003 Tiburon. CNK is selling a complete turbo kit for about $3000 with upgraded ecu, you can find out more information @ hyundaiaftermarket.com. KORE has a turbo manifold for a t3. The shop at HyundaiPerformance.com is constantly getting updates to the store. APEXi is coming out with a turbo kit for the Tiburon which would work on the Elantra. The Beta engine loves to be boosted. You could even use the 1g & 2g manifolds with just fixing one bolt if you are really cheap.
If you are looking for body kits, sharkracing.com has the most for any of the Hyundai cars. ElantaXD should also, or atleast tell you where to get some.
There is more aftermarket for your car than you think.
If you are looking for body kits, sharkracing.com has the most for any of the Hyundai cars. ElantaXD should also, or atleast tell you where to get some.
There is more aftermarket for your car than you think.
Registered User
Joined: Aug 2002
Posts: 0
Likes: 0
CNK Special offer: 300HP Turbo Package for $3000
Includes:
-New CNK ecu tuned already for the package.
-T3/T4 hybrid turbocharger with CNK 360 thrust washer and annodized backplate to your colour spec
-CNK polished aluminum oil catch can
-CNK External Wastegate - 32mm stainless steel valve, 0.5bar spring as standard - andles up to 550HP
- CNK Stainless steel exhaust manifold with Ext Wastegate port - polished
-CNK Low compresson Turbo pistons with rings - 8.5 to 1 CR
-CNK Big End Bearings
-CNK D/pipe with Ext Wastegate return
-CNK Front Mount Intercooler
-CNK BOV - anoodized to your colour spec
-Lucas 16 ohm 550cc injectors - set of 4
-CNK High volume fuel pump - 10 bar pressure
-Polished 76mm stainless steel CNK exhaust
Includes:
-New CNK ecu tuned already for the package.
-T3/T4 hybrid turbocharger with CNK 360 thrust washer and annodized backplate to your colour spec
-CNK polished aluminum oil catch can
-CNK External Wastegate - 32mm stainless steel valve, 0.5bar spring as standard - andles up to 550HP
- CNK Stainless steel exhaust manifold with Ext Wastegate port - polished
-CNK Low compresson Turbo pistons with rings - 8.5 to 1 CR
-CNK Big End Bearings
-CNK D/pipe with Ext Wastegate return
-CNK Front Mount Intercooler
-CNK BOV - anoodized to your colour spec
-Lucas 16 ohm 550cc injectors - set of 4
-CNK High volume fuel pump - 10 bar pressure
-Polished 76mm stainless steel CNK exhaust
Thread Starter
My d20 decides.
Joined: Feb 2003
Posts: 4,948
Likes: 0
Thanx Midnight, the only problem with that is I don't want to spend $3k on a MOD when my car only cost me $5k, if I had the $3k to spend I would spend the money on appearance MODs first.
__________________
-KuJoe
-KuJoe
