i am not getting power to the injectors..i have tryed a different ecu and changed the egi relay ad egi pump ralay... i think there could be a problem throughout the harness but i am not sure at the moment. I would like to have someone who knows more about the s13 chassis more than i do and find this problem!!! i am located in kissimmee..i am willing to work something out..call or text 3214023091 kerry

 

is your injector ground hooked up?

 

I made sure the pin didn't come out of the ecu. It was good, along with all the other pins. Everything is plugged-in under the hood. What injector ground are you talking about.

 

"ENG CONT" fuse make sure that one is good... without it, the injectors won't get power

 

Fuses are good

 

Keep in mind I AM getting power to the relays! Hmm

 

you think they are, or you pulled it out and checked to know for sure it is?


beyond that, the injectors share a common ground, so maybe you missed the ground.

 

and make sure your injectors themselves are just shot. hit them with power straight from the battery and they should spray (assuming there is pressure in the lines)

 

i pulled them all and everything checked out fine.. i will double check them in a min just to be sure..i have everything grounded i am sure..where should i be looking for the actual injector ground????

 

ok so i lied....i AM getting power to the injectors, but ONLY when i crank the car over... I thought there was always suppose to be 12v when the key was in the on position?? correct me if im wrong...help me start this bitch today!!!