Side skirt install
no
Joined: Mar 2007
Posts: 3,328
Likes: 0
Self tapping screws and liquid nails... lmao
Ib4tsink
Ib4tsink
im jk.... but seriously
Joined: Mar 2005
Posts: 1,032
Likes: 0
even my oem chuki 180 skirts required two drilled holes per end. i used a 10mm bolt and nut on the inner fender. shits on secure, they also have the factory pinch weld under bracing mount thingy's too.
__________________
"How about i punchasize your face?"
R.I.P
Tim Aldrich (Osama Tim Laden)
"How about i punchasize your face?"
R.I.P
Tim Aldrich (Osama Tim Laden)
Doesnt see what you did
Joined: Sep 2007
Posts: 3,683
Likes: 0
Registered User
Joined: May 2004
Posts: 1,398
Likes: 0
dzus fasteners are awesome for stuff like this. but if you want more looks then id go with molding tape and or self tappers on the inner sides of the fender wells, with a couple on the bottom by the pinch weld
__________________
if you havent been in a small plane its worst, cause your eyes and brain say we are moving and your body says oh no we are not. eyes and brain go asshole we are moving, cant you see? body says fuck you we are not moving at all. so they fight and fight and eventualy your body says, you know what fuck you brain, see if you can stop this!! then you throw up.
if you havent been in a small plane its worst, cause your eyes and brain say we are moving and your body says oh no we are not. eyes and brain go asshole we are moving, cant you see? body says fuck you we are not moving at all. so they fight and fight and eventualy your body says, you know what fuck you brain, see if you can stop this!! then you throw up.
what would NPH do?
Joined: Nov 2008
Posts: 621
Likes: 0
