need help bad
Thread Starter
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
need help bad
Hi guys I just wonder if anybody got a picture of the inside of the s13 fuxe box and also the measurements. I am trying to make my s14 engine fuse box smaller.that way it will fit on the engine bay. I am trying to avoid to put it on the inside of the car. Thanks in advance....Omar
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
Thread Starter
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
come on nobody?
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
buildin' it
Joined: Aug 2006
Posts: 4,565
Likes: 0
I don't know if I'm entirely sure what you are looking for...
You want to know how big the box itself actually is?
as for the picture of the inside... What are you trying to figure out?
here's a picture of the cover, tells you what is where...
If I was a little more clear on what you are trying to figure out, then I would go out to my garage and get the pics you need....
You want to know how big the box itself actually is?
as for the picture of the inside... What are you trying to figure out?
here's a picture of the cover, tells you what is where...
If I was a little more clear on what you are trying to figure out, then I would go out to my garage and get the pics you need....
Thread Starter
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
Thanks man for the help . I need the measurements of the box . And if you dont mind a picture of the inside. I am trying to figure out how many relays and fuses are inside the box . Thanks for your help ...Omar
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
buildin' it
Joined: Aug 2006
Posts: 4,565
Likes: 0
my box only has three relays the EGI relay, the EGI PUMP, and the H/L RET CONT relays.
all of the rest of the boxes are fuses.
I'd take a picture for ya, but of course, my batteries are dead in my camera...
all of the rest of the boxes are fuses.
I'd take a picture for ya, but of course, my batteries are dead in my camera...
Thread Starter
Registered User
Joined: May 2005
Posts: 3,191
Likes: 0
cool man thanks
__________________
My shit still slow
618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
My shit still slow618 whp 492 ft/lbs at 22 psi (Low Boost)on pump gas ,
stock block ,more power coming soon ,stay tuned
Tuned by Alpha @ Induction Performance
