massive help needed!
Thread Starter
Registered User
Joined: Sep 2009
Posts: 409
Likes: 0
massive help needed!
So I've been having issues with my s13. Its riding really bumpy and when I turn I hear a loud bang that you can feel in the paaenger seat. I've been told its my tie bars but I'm not sure anyone have any ideas?
OG Join Date: 6-15-00
Joined: Jul 2007
Posts: 4,894
Likes: 0
It's hard to tell visually. From what you said about the problem, they're gone. Remove and replace them, they're 40-50 bucks a pop.
__________________
1973 VW Squareback
1979 AMC Jeep Cherokee Chief
RIP Tim
1973 VW Squareback
1979 AMC Jeep Cherokee Chief
RIP Tim
Registered User
Joined: Sep 2009
Posts: 408
Likes: 0
no more like 30
__________________
Carisma Built Ka(BC Valve, Springs, Retainers, JE Pistons, Eagle Rods,Cometic HG, Supertech Intake Valves, Supertech .5+ Exhaust Valves
Garrett T3 .63 A/R
Bc Stage 2 Cams
Z32 Maf
Injector Dynamics 725cc
10lb Tial Wastegate
Open Downpipe(blah)
Greddy Type S Bov
Enthalpy Rom Tuned
Carisma Built Ka(BC Valve, Springs, Retainers, JE Pistons, Eagle Rods,Cometic HG, Supertech Intake Valves, Supertech .5+ Exhaust Valves
Garrett T3 .63 A/R
Bc Stage 2 Cams
Z32 Maf
Injector Dynamics 725cc
10lb Tial Wastegate
Open Downpipe(blah)
Greddy Type S Bov
Enthalpy Rom Tuned
Registered User
Joined: Sep 2009
Posts: 408
Likes: 0
there kinda simple to replace
__________________
Carisma Built Ka(BC Valve, Springs, Retainers, JE Pistons, Eagle Rods,Cometic HG, Supertech Intake Valves, Supertech .5+ Exhaust Valves
Garrett T3 .63 A/R
Bc Stage 2 Cams
Z32 Maf
Injector Dynamics 725cc
10lb Tial Wastegate
Open Downpipe(blah)
Greddy Type S Bov
Enthalpy Rom Tuned
Carisma Built Ka(BC Valve, Springs, Retainers, JE Pistons, Eagle Rods,Cometic HG, Supertech Intake Valves, Supertech .5+ Exhaust Valves
Garrett T3 .63 A/R
Bc Stage 2 Cams
Z32 Maf
Injector Dynamics 725cc
10lb Tial Wastegate
Open Downpipe(blah)
Greddy Type S Bov
Enthalpy Rom Tuned
Top Secret
Joined: Jul 2008
Posts: 647
Likes: 0
i just bought lower control arms with the ball joints already pressed in them today from napa, they were about 65 each
just the lower ball joints are like 55 each, then you have to pay to get them pressed in
so i'll leave you to conclude the better deal
just the lower ball joints are like 55 each, then you have to pay to get them pressed in
so i'll leave you to conclude the better deal
__________________
